Overview
The Pro Comp PCW52-7873 is a 17×8 steel wheel from the Rock Crawler Series 52, in a gloss black powder-coat finish with a 5 on 5 bolt pattern. It is sold as a single wheel, and the lug nuts and center cap are sold separately.
The offset is -38 and the backspacing is 4, so the rim sits well outboard of its mounting face and the tire position changes with it. Confirm the hub bore fits the wheel before mounting.
Key features
- Steel Rock Crawler wheel in the Series 52 line
- 17-inch diameter, 8-inch width
- 5 on 5 bolt pattern
- Offset -38 with 4 backspacing
- Gloss black powder-coat finish
- Made in the USA.
Steel wheels on the trail
Steel wheels are a common choice for off-road builds because they bend rather than crack when they strike rocks at speed. On the trail, a bent steel rim can often be reshaped, which helps when you are far from a shop. Steel is heavier than aluminum, so the added unsprung weight can affect steering response and suspension articulation on a vehicle that already carries a lift.
Offset and backspacing decide how far the tire sits from the suspension and brake parts. A deep negative offset pushes the tire outward, which can increase rubbing on fenders and tie rods when the suspension flexes. Owners often pair wheels like this with wider fender flares or a lower-profile tire to keep room. Recheck the whole assembly after the first few trail runs.
- Check wheel bearings and hub seals after mounting
- Re-torque lug nuts after the first few drives
- Inspect the powder coat for chips where rock contact begins
- Balance the tire and wheel assembly before installing
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW52-7873 |
| Series | Rock Crawler Series 52 |
| Construction | Steel |
| Finish | Gloss black powder |
| Diameter | 17 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 5 |
| Offset | -38 |
| Backspacing | 4 |
Vehicle fitment
This wheel is not built for a named vehicle. A 5 on 5 hub is required, and the -38 offset needs a clearance check at the fender and brake caliper before the tire goes on.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The -38 offset is deep, so confirm that the tire and wheel clear the fender liners and steering components at full travel. Confirm the hub bore matches your hub before mounting.
What’s included
One 17×8 wheel. Lug nuts and the center cap are sold separately.









