Overview
The Pro Comp PCW51-6885 is a 16×8 steel wheel from the Pro Comp 51 Series, with a windowed face, a 5 on 5.5 bolt pattern and a gloss black finish. It is a single wheel, and the center cap and lug nuts are not part of the order.
The 51 Series is Pro Comp’s steel Rock Crawler line, which the brand describes as using the finest materials with a powder-coated finish. This 16-inch wheel is 8 inches wide and carries a center bore of 108, which is the number to match against the hub. Offset is -6 and backspacing is 4.25, so the tire will sit farther outward than on a zero-offset wheel.
Key features
- Windowed steel wheel from the 51 Series
- 16-inch diameter with an 8-inch width
- 5 on 5.5 bolt pattern
- Center bore of 108
- Offset -6 with 4.25 backspacing
- Gloss black powder-coat finish
Matching the bolt pattern
A 5 on 5.5 pattern and a 5 on 5 pattern look similar but do not interchange, so lug count and spacing must be confirmed before ordering. Measure from the center of one stud to the far edge of the opposite stud, then compare the result with the hub. Mismatched patterns can work loose or fail under load.
Hub-centric fit matters on a wheel with a 108 center bore. The bore should sit on the hub so the load goes through the hub rather than the studs. Clean rust and paint from the hub face before mounting, and make sure the wheel seats flat before tightening the lug nuts in a star pattern.
- Measure bolt spacing before buying
- Clean the hub face before installing
- Tighten lugs in a star pattern
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-6885 |
| Series | 51 Series |
| Style | Windowed |
| Construction | Steel |
| Finish | Gloss black |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 4.25 |
Vehicle fitment
This wheel has no vehicle list attached. Universal fit on the specifications means the wheel is not limited to one model, not that every 5 on 5.5 vehicle will clear it. A 5 on 5.5 hub with the 108 center bore is the match to check, along with inner-fender clearance at -6 offset.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 5 on 5.5 pattern is a different bolt layout from the 5 on 5 version of this wheel, so check the hub before buying. Test-fit the rim with the tire and brake caliper in place, since a 4.25 backspacing leaves limited room behind the mounting face on some trucks.
What’s included
One 16×8 wheel. The center cap and lug nuts are sold separately.









