Overview
The Pro Comp 51 Series Rock Crawler 15×10 wheel, part number PCW51-5183F, is a 15-inch steel wheel that is 10 inches wide. It has a 6 on 5.5 bolt pattern and a flat black finish with a windowed design.
The wheel has a 108 center bore, a -44 offset and a backspacing of 3.75. It is a steel rock crawler wheel with a flat black coating, made in a range of sizes and backspacings. It is universal fit and is not tied to a specific vehicle.
Key features
- Steel construction
- 15-inch diameter, 10-inch width
- 6 on 5.5 bolt pattern
- Center bore 108
- Offset -44 with backspacing 3.75
- Flat black windowed finish
Choosing wheel offset and clearance
Offset and backspacing decide where the tire sits relative to the hub, and that position controls how the wheel clears the fender, the steering components and the brake caliper. A deeply negative offset pushes the tire outward for a wider stance and more tire coverage on the trail, but it also loads the wheel bearings and steering joints differently from a stock setup. Before buying, compare the offset with the tire width and tire diameter you plan to run, since a wider tire on the same offset moves its outer edge further out.
Rock crawling tends to put the outer rim edge into rocks and trail debris. Steel wheels are easier to straighten after a bend than aluminum, but a bent rim that no longer holds the bead still needs replacing. Check the rim after hard landings and inspect the lug seats for cracks after the first few runs with a new setup.
- Match the tire load rating to the vehicle and tire size
- Recheck lug torque after the first few trail runs
- Look for bent rims and cracked welds after rock strikes
- Measure steering lock with the tire mounted
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-5183F |
| Wheel diameter | 15 inches |
| Wheel width | 10 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -44 |
| Backspacing | 3.75 |
| Style | Windowed |
| Finish | Flat black |
| Construction | Steel |
| Series | 51 Series District |
Vehicle fitment
This wheel is universal fit and not matched to a vehicle. Confirm the 6 on 5.5 hub and 108 center bore, then measure the -44 offset against the fender and suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The -44 offset places the wheel far outboard, so inspect the fender and any inner components after mounting, before the first drive.
Pro Comp describes its steel Rock Crawler wheels as suited to rough terrain. This 15×10 flat black version has a 6 on 5.5 pattern and a 108 center bore, and the -44 offset means the tire sits far outboard, so fender and suspension clearance should be measured before the first drive.
What’s included
Not included: center caps and lug nuts, sold separately.









