Overview
The Pro Comp 51 Series Rock Crawler 15×8 wheel, part number PCW51-5885F, is a 15-inch steel wheel with an 8-inch width. It has a 5 on 5.5 bolt pattern and a flat black finish in a windowed style.
The wheel has a 108 center bore, a -6 offset and a backspacing of 3.75. It is shallower in offset than the -38 and -44 Rock Crawler versions in the line. It is a steel wheel with a flat black powder coating and is universal fit.
Key features
- Steel construction
- 15-inch diameter, 8-inch width
- 5 on 5.5 bolt pattern
- Center bore 108
- Offset -6 with backspacing 3.75
- Flat black windowed finish
Powder coating and wheel care
Powder coating is applied as a dry powder and cured with heat, which gives a thick, durable film compared with many spray finishes. On a wheel that sees rocks, sand and salt, the coating is the first line of defense for the steel beneath it. Scratches that reach bare metal can start rust, so repairing chips with a suitable touch-up product keeps corrosion from spreading under the coating.
Shallow offsets keep the wheel tucked closer to the vehicle, which reduces the load on the steering knuckles and outer wheel bearings compared with very deep negative offsets. That does not remove the need to check clearance. A tire wider than the original spec can still rub at full lock, so test the steering after any tire change. Check the wheel bolts and lug seats after the first few drives on rough ground.
- Clean mud and salt off the face regularly
- Touch up chips before rust forms
- Recheck clearance after changing tire width
- Inspect bead seats after any hard landing
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-5885F |
| Wheel diameter | 15 inches |
| Wheel width | 8 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 3.75 |
| Style | Windowed |
| Finish | Flat black |
| Construction | Steel |
| Series | 51 Series District |
Vehicle fitment
No vehicle is named for this 15×8 steel wheel, and it is universal fit. Check the 5 on 5.5 hub and 108 center bore, then confirm the -6 offset clears the brake caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A -6 offset keeps the wheel closer to the hub than the deeper negative-offset versions, but fender and caliper clearance still need a check after mounting.
Flat black steel construction is made for rough terrain use. The -6 offset sits closer to the hub than deeper negative offsets, and the 5 on 5.5 pattern with a 108 center bore must match the hub.
What’s included
Not included: center cap and lug nuts, which are sold separately.











