Overview
The Pro Comp 51 Series Rock Crawler 15×8 wheel, part number PCW51-5885, is a 15-inch steel wheel that is 8 inches wide. It uses a 5 on 5.5 bolt pattern and a gloss black finish with a windowed style.
This version has a 108 center bore, a -19 offset and a backspacing of 3.75. The -19 offset sits between the shallow and deep options in the Rock Crawler line. It is a steel wheel that is universal fit.
Key features
- Steel construction
- 15-inch diameter, 8-inch width
- 5 on 5.5 bolt pattern
- Center bore 108
- Offset -19 with backspacing 3.75
- Gloss black windowed style
Tire width and offset balance
Tire width and wheel offset work together to set the outer edge of the tire position. A wider tire on the same rim moves its sidewall outward, so the tire can reach the fender sooner, especially on a negative offset. Many off-road setups pair a moderate negative offset with a tire that matches the rim width, keeping sidewall flex and steering load within reasonable limits.
Gloss black finishes need routine attention on trails. Mud and grit trapped against the rim lip wear the paint along the edge first, so rinsing after each outing helps. Wheel weights and balance can shift after a tire is repaired, so have the assembly rebalanced before a long run rather than waiting for vibration to appear.
- Match tire width to the rim width range
- Test steering lock with the tire mounted
- Rebalance after any tire repair
- Recheck fender clearance after suspension changes
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-5885 |
| Wheel diameter | 15 inches |
| Wheel width | 8 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -19 |
| Backspacing | 3.75 |
| Style | Windowed |
| Finish | Gloss black |
| Construction | Steel |
| Series | 51 Series District |
Vehicle fitment
This wheel has no vehicle list and is universal fit. Compare the 5 on 5.5 pattern and 108 center bore with the hub, and make sure the -19 offset clears the fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify fender and caliper clearance with the wheel mounted, since the -19 offset moves the tire outward from the hub face.
The steel build is made for rough terrain use. Confirm the 5 on 5.5 pattern and 108 center bore on the hub, then measure the -19 offset against fender clearance. The 3.75 backspacing sets the inner position relative to the caliper.
What’s included
Not included: center caps and lug nuts, sold separately.











