Overview
The Pro Comp PCW51-7981 is a 17×9 steel wheel from the Pro Comp 51 Series, in a black windowed design with an 8 on 6.5 bolt pattern. It is sold as one wheel, and the lug nuts and center cap are sold separately.
The 51 Series is made of steel wheels offered in sizes and back spacings for different builds, with a powder-coated finish. This 17-inch, 9-inch-wide version has an 8 on 6.5 pattern and a center bore of 131, along with an offset of -19 and a backspacing of 4.25.
Key features
- Steel windowed wheel in black
- 17-inch diameter, 9-inch width
- 8 on 6.5 bolt pattern
- Center bore of 131
- Offset -19 and backspacing 4.25
- Part of the 51 Series steel range
Choosing a 17-inch wheel
A 17-inch wheel reduces the sidewall height of the tire for the same overall diameter, so the tire has less cushion on sharp rock and in ruts. Many builders choose this size for a sharper look and a wider tire choice, but the trade-off is a firmer ride and more chance of rim damage on the trail. Compare the rolling diameter of the new tire with the original so speedometer and gearing stay close to accurate.
A 9-inch wide rim fits tires in a limited width range, and a tire that is too wide for the rim can bulge and wear unevenly. Check a tire size chart for the rim width before buying. The offset of -19 pushes the tire outward, so measure fender clearance with the tire mounted at normal ride height and again at full suspension compression.
Steel wheels are generally easier to straighten after a bend than aluminum, though a cracked rim still needs replacement. Inspect the bead seat and the spokes after each hard trail session, and keep the lug nuts torqued after the first drives on a new setup.
- Compare rolling diameter with the original tire
- Check tire width against the rim width range
- Measure fender clearance at full compression
- Inspect bead seats after rock contact
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-7981 |
| Series | 51 Series |
| Style | Windowed |
| Construction | Steel |
| Finish | Black |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 131 |
| Offset | -19 |
| Backspacing | 4.25 |
Vehicle fitment
No vehicle is named for this wheel. The universal fit label means only that the wheel is not tied to one model. An 8 on 6.5 hub and the 131 center bore are the first checks, then clearance at the -19 offset.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An 8-lug hub at 6.5 is the required match, so measure before ordering. The center bore should sit on the hub as a snug fit, and a test fit with the tire will show whether the rim clears the caliper and suspension arms.
What’s included
One 17×9 wheel. The lug nuts and center cap are sold separately.









