Overview
The Pro Comp Stage II Lift Kit with ES9000 Shocks, part number K3090B, is a 4 inch coil spring and short arm lift kit for the 2007–2018 Jeep Wrangler (JK) Unlimited. It raises the front and rear with coil springs and includes ES9000 shocks at all four corners.
The Stage II kit adds front sway bar links, bump stop extensions, boxed lower control arms and brake line extension brackets to the springs and shocks. The lift height range is 3 to 4.99 inches.
Key features
- 4 Inches stage 2 coil spring and short arm lift
- Front and rear lift with coil springs
- ES9000 shocks included, front and rear
- Front sway bar links
- Bump stop extensions
- Boxed lower control arms
- Brake line extension brackets
- Lift height range of 3 to 4.99 inches
Lift height and daily driving
A four inch short arm lift changes the geometry of the whole suspension, so the way the truck tracks and steers shifts. Coil springs and boxed control arms work together to hold the axles in position at the new height. Driveline angles also change, which can add vibration if the lift is not balanced.
Daily driving with a higher center of gravity calls for steady braking and slower cornering. Tire pressures and wheel offsets affect steering response, so review them after the lift is in. Keep brake lines and cables free of tension at full droop to avoid strain.
Regular inspection keeps the system predictable. Look for worn bump stops, cracked bushings and leaking shocks at each service, and check the alignment after any work on the front end.
- Check driveline angles after lifting
- Inspect boxed control arm bushings at each service
- Replace cracked bump stops promptly
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K3090B |
| UPC | 614901123494 |
| Product type | Lift kit |
| Kit level | Stage 2, 4 Inches |
| Lift height range | 3 to 4.99 Inches |
| Suspension type | Coil spring and short arm |
| Front lift method | Coil springs |
| Rear lift method | Coil springs |
| Shocks | ES9000, front and rear (included) |
| Other components | Front sway bar links, bump stop extensions, boxed lower control arms, brake line extension brackets |
| Fit type | Direct fit |
Vehicle fitment
The K3090B fits the 2007–2018 Jeep Wrangler (JK) Unlimited in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
This kit is for the Unlimited JK, so confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A lift kit changes how the whole suspension behaves, so professional installation is recommended. Support the vehicle on jack stands on level ground, and never work under it when only a jack is holding it. Tighten all hardware to its torque specification and check it again after the first few miles. Finish with an alignment, and confirm that brake lines, cables and wiring have enough slack across the whole range of travel.
A lift changes ride height, headlight aim, brake line routing and steering geometry, so have the alignment checked, confirm brake line and cable clearance, and check local lift-height regulations.
What’s included
Coil springs for the front and rear, front and rear ES9000 shocks, front sway bar links, bump stop extensions, boxed lower control arms and brake line extension brackets.












