Overview
The Pro Comp 95-551SD is a rear lift block at 5.5 inches and up for leaf spring trucks. Pro Comp suspension parts are engineered for proper steering and suspension geometry, and this block is designed to maximize tire clearance for off-road use without major compromises on pavement.
A block of this thickness changes the axle position more than the smaller blocks in the line, so driveshaft angle and U-bolt length matter more at this height. Confirm the exact thickness and the vehicles it suits before fitting.
Before ordering, check the lift against your truck’s current suspension height and confirm the rear spring setup, since the specifications list the lift only as 5.5 inches and up.
Key features
- Rear lift of 5.5 inches and up
- Leaf spring rear suspension use
- Pro Comp steering and suspension geometry design
Clearance and driveline checks
At 5.5 inches and up, the rear axle sits well away from its original position, so clearance around the brake lines, the exhaust and the fuel lines needs a check. Tires rubbing the fender lip or inner liner are a common sign that the height or the tire size needs adjusting. Off-road use puts more load on the rear springs and shackles, so inspect them for wear once the lift is in place.
The driveline is the other concern. A larger angle at the driveshaft can cause vibration and wear on the U-joints, and a longer or shorter driveshaft may be needed depending on the setup. Replacing the U-bolts with a longer set and keeping the shocks in sound condition helps the rear axle stay square under load.
- Check brake line and exhaust clearance
- Inspect U-joints for vibration
- Recheck U-bolt torque after first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-551SD |
| Position | Rear |
| Lift | 5.5 in and up |
Vehicle fitment
Before ordering, match your truck’s year, model and rear suspension to this block, since a rear lift block at this height is sized for a specific leaf spring setup.
A rear lift block at this height is sized for a specific leaf spring setup, so do not assume fit from the part name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At 5.5 inches and up, check the driveshaft angles and the U-bolt length after installation, and confirm the brake lines and the exhaust have room at the new height.
What’s included
One rear lift block.
Not included: U-bolts and hardware.







