Overview
The Pro Comp 57789 is a 3.5 inch rear lift block kit for leaf spring suspensions. It pairs two tapered cast iron riser blocks with four U-bolts and the washers and nuts that clamp them to the spring pack.
The taper helps keep driveshaft angles in better shape once the rear is lifted.
Key features
- 3.5 inch rear lift height
- Two tapered cast iron riser blocks
- Four U-bolts for mounting
- Eight heavy duty flat washers and eight hi-nuts
Leaf spring rear lifts
Leaf spring suspensions raise differently from coil setups, because the spring pack itself carries the rear height and the axle sits beneath it. A block placed between the axle and the spring pack moves the whole assembly up, so the springs, shackles and shocks all see a changed geometry. That is why a block lift is usually paired with a check of the rear shock length and the shackle movement.
Before you fit the blocks, inspect the spring pack for cracked leaves, loose center bolts and sagging. A worn pack will not hold the new height well and can shift under the U-bolts. Look at the shackles and bushings as well, since they are often the first parts to show strain after the rear is raised.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57789 |
| UPC | 614901111248 |
| Type | Rear block with U-bolt kit |
| Lift height | 3.5 in |
| Block material | Cast iron |
| Block shape | Tapered |
| Hardware | 4 U-bolts, 8 heavy duty flat washers, 8 hi-nuts |
Vehicle fitment
Fit depends on the rear axle and the spring pack, so check both before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the blocks on the rear leaf springs with the supplied U-bolts. Check that the U-bolts clear the spring pack and axle once the blocks are in place.
What’s included
Two cast iron riser blocks, four U-bolts, eight heavy duty flat washers and eight hi-nuts.





