Overview
The California Super Trucks 1 inch lift block kit, part number CSB-C14-1, is a rear block kit for 2003 and newer Dodge 2500 and 3500 trucks. California Super Trucks designed it for the 3 pin center pin leaf spring setup on those trucks.
The kit is a direct fit for 2003 and newer Dodge 2500 and 3500 trucks. Dodge trucks from before 2003 are not covered by that fit.
Key features
- 1 inch lift at the rear
- Designed for 3 pin center pin leaf springs
- Built for 2003 and newer Dodge 2500 and 3500 trucks
- Rear block kit
Leaf spring 3 pin setups
A 3 pin center pin leaf spring setup locates the block on the spring and helps keep it from shifting sideways. The pins matter because a block that moves under load can change the rear alignment and wear tires faster. Before fitting, make sure the spring pad is clean and that the pins line up with the holes in the block.
Rear blocks raise the axle relative to the frame, so the driveshaft, brake lines and shocks all see a change. Check each after installation, and look at the spring hangers and shackles for wear. The kit is best handled with the truck supported on stable stands while the hardware is torqued.
- Confirm pins line up with the block holes
- Check shock and brake line length
- Inspect spring hangers and shackles for wear
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSB-C14-1 |
| UPC | 70000220203 |
| Lift height | 1 inch |
| Position | Rear |
| Spring design | 3 pin center pin leaf spring |
| Fitment | Direct fit |
Vehicle fitment
The fit is for 2003 and newer Dodge 2500 and 3500 trucks. Other Dodge models and years fall outside that range.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a rear block kit. Check the contents, including quantity and any hardware you need, against your installation before starting.









