Overview
The Pro Comp 48 Series Quick 8 20×9 wheel, part number PXA5148-293950, is a 20-inch aluminum spoke wheel that is 9 inches wide. The primary bolt pattern is 6 on 5.5, with 6 on 135 also listed, and the finish is satin black milled, named in the series as 48 Series Quick 8 satin black milled.
The wheel has a 108 center bore, a 0 offset and a backspacing of 5. Pro Comp states its alloys are rated for 2500 to 3650 lbs per wheel and built with low-pressure casting. No vehicle is named, and the brand classes the wheel as universal fit.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 6 on 5.5 bolt pattern, 6 on 135 also listed
- Center bore 108
- Offset 0 and backspacing 5
- Satin black milled finish
Choosing between two six-lug layouts
A wheel with two six-lug patterns needs a careful hub check, because 6 on 5.5 and 6 on 135 are different layouts that look similar at a glance. Measure the stud spacing and bolt circle on the hub before fitting. Adapters that change the bolt pattern add another part to torque and inspect, so use them only when the adapter is designed for the exact patterns involved.
After fitment, check that the tire clears the caliper and inner fender at full steering lock, and that the tire’s load and size suit the wheel width. Keep a record of the pattern and center bore you confirmed, so future tire service starts from measured values rather than memory. Re-check lug torque after the first few drives on new wheels.
- Measure stud spacing and bolt circle
- Use only adapters designed for the exact patterns
- Record measured hub values for future service
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5148-293950 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 (also 6 on 135) |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel |
| Style | Spoke |
| Finish | Satin black milled |
| Construction | Aluminum |
| Series | 48 Series Quick 8 |
Vehicle fitment
This Quick 8 is universal fit and is not matched to a vehicle. Confirm which of the two six-lug layouts, 6 on 5.5 or 6 on 135, matches the hub, and check the 108 center bore.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because two six-lug patterns are listed, measure the hub before mounting and test-fit the wheel with the brakes in place.
The Quick 8 is listed with two six-lug patterns, so the hub must match either 6 on 5.5 or 6 on 135 exactly. The 108 center bore and 0 offset keep the mounting face centered, and the 9-inch width sets the tire options. Measure the hub before ordering.
What’s included
One 20×9 satin black milled wheel. Plan for hub hardware selection before mounting.











