Overview
The Pro Comp 41 Series Phaser 18×9 wheel, part number PXA5041-897350, is an 18-inch aluminum split spoke wheel that is 9 inches wide. It uses a 5 on 5 bolt pattern and a satin black finish, which the series name gives as 41 Series Phaser satin black.
The wheel has a 131 center bore, a 0 offset and a backspacing of 5. Its large center bore has to match the hub for the wheel to seat properly. The alloy is low-pressure cast, and the wheel is universal fit and not assigned to a specific vehicle.
Key features
- Low-pressure cast aluminum
- 18-inch diameter and 9-inch width
- 5 on 5 bolt pattern
- Center bore 131
- Offset 0 and backspacing 5
- Satin black split spoke design
Choosing the right setup
Wheel selection starts with the hub. The bolt pattern and center bore determine whether a wheel can be mounted at all, so these figures should be checked before anything else. A center bore larger than the hub is typically fitted with hub-centric rings to hold the wheel true, which is a common add-on when a wheel is chosen for a range of vehicles.
Offset and backspacing control where the tire sits relative to the fender and suspension. Split spoke designs can look light but still need the same clearance checks as any other cast wheel. Tire size should be chosen together with the wheel, because width and diameter change how the tire loads the rim.
Wheel bolts and seats often get replaced along with a new wheel, especially when the old set came from a different style. Check that the seat type of the lug nuts matches the wheel before tightening. Re-torque after the first drives and inspect the bolt holes for cracks during routine checks.
- Confirm hub bore and bolt pattern by measurement
- Check caliper clearance with the tire mounted
- Match lug seat type to the wheel
- Re-check lug torque after the first few drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5041-897350 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 131 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Split spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 41 Series Phaser |
Vehicle fitment
This 18×9 wheel has no vehicle list and is universal fit. The 131 center bore is the first measurement to match to the hub, followed by the 5 on 5 pattern and the wheel’s clearance to the brake caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A center bore that is too small or too large for the hub prevents correct seating, so confirm the hub diameter by measurement. Check caliper clearance once the wheel is mounted.
The satin black split spoke face is cast from aluminum and carries the 18×9 size and 0 offset described above. Measure the hub’s bolt pattern before ordering.
What’s included
One 18×9 satin black wheel is included. Compare the package contents with your installation before starting.











