Overview
The Pro Comp PXA1069-5183 is a 15×10 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 6 on 5.5 bolt pattern. It is sold as one wheel with a center bore of 125 and an offset of -47.
Pro Comp says its alloys are made with low-pressure casting and combine head-turning style with light weight in black, chrome or polished finishes. This polished model has a backspacing of 3.65, and the brand ties its high offset design to brake clearance on trucks and SUVs.
Key features
- Low-pressure cast aluminum
- Holes style face
- 15-inch diameter, 10-inch width
- 6 on 5.5 bolt pattern
- Center bore of 125
- Offset -47 with 3.65 backspacing
Lift height and clearance
Lift height and tire size both change how much room a wheel has. A taller tire moves the contact point outward and up, so the fender, brake caliper and steering components all need checking. Negative offset adds outward spacing, which is why clearance tests with the tire mounted are more reliable than measuring the rim alone. Before choosing a setup, look at how the suspension is configured and whether any aftermarket parts have changed its geometry.
Six-lug hubs are common on mid-size trucks and some SUVs, but the bolt pattern alone does not confirm a match. The hub pilot and center bore must seat without forcing, since a loose fit can cause vibration at speed. Seat the nuts evenly in a star sequence, then retorque them after the first drive.
- Measure clearance at full left and right lock
- Verify hub pilot size before mounting
- Recheck lug torque after the first few trips
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-5183 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 15 inches |
| Width | 10 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 125 |
| Offset | -47 |
| Backspacing | 3.65 |
Vehicle fitment
No vehicle is named for this wheel, so it is a universal design that does not tie to one model. The 6 on 5.5 pattern and 125 center bore must match the hub, and the -47 offset needs a check of brake and steering clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use a six-lug hub measuring 5.5 across the bolt holes. Confirm the hub pilot matches the 125 center bore before ordering, then test-fit with the tire to check the caliper.
What’s included
One 15×10 aluminum wheel. Lug nuts and a center cap are unclear, so review the delivered parts before fitting.











