Overview
The Pro Comp 44 Series Syndrome 17×9 wheel, part number PXA5044-7983, is a 17-inch aluminum spoke wheel with a 9-inch width. Its bolt pattern is 6 on 5.5, and the satin black finish is named in the series as 44 Series Syndrome satin black.
The wheel has a 114 center bore, a -6 offset and a 4.75 backspacing. It is low-pressure cast and rated at 2500 to 3650 lbs per wheel. The fit is universal, so no vehicle is matched.
Key features
- Low-pressure cast aluminum
- 17 inches in diameter, 9 inches wide
- 6 on 5.5 bolt pattern
- Center bore 114
- Offset -6 and backspacing 4.75
- Satin black spoke finish
Hub size and clearance
Six-lug hubs with a 114 center bore need a careful match. A bore that is too small will not seat, and one that is too large usually calls for hub-centric rings. Measure the hub pilot and bolt pattern before the wheel is chosen, since both decide whether it sits square against the hub face.
The offset places the mounting face outward, which changes how the tire clears the caliper, the control arm and the fender. Tire diameter adds to that effect. Recheck clearance at full steering lock and with the suspension compressed, because either can bring the tire into contact.
Shops often mount a new wheel with the tire already balanced, but a check on the vehicle after a few miles is still useful. Look for vibration at highway speed, pulling under braking, and any sound that suggests the wheel is touching the caliper or a fender liner.
- Measure the pilot diameter before fitting
- Use hub-centric rings only when the bore is larger
- Inspect ball joints and tie-rod ends for play
- Check caliper gap after mounting
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5044-7983 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 114 |
| Offset | -6 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel. |
| Style | Spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 44 Series Syndrome |
Vehicle fitment
No vehicle list applies to this 17×9 wheel. The 6 on 5.5 pattern and 114 center bore are the hub figures to confirm, and the -6 offset should be checked against the fender and caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the wheel is offset outward, confirm the outer clearance and the caliper fit after mounting, and test the steering and suspension travel before driving.
The 6 on 5.5 pattern and 114 center bore must match the hub. The -6 offset places the wheel face outward and the 4.75 backspacing sets the inner clearance, so measure both against the brake caliper and suspension before driving.
The 9-inch width and 17-inch diameter describe the wheel size, and the satin black spoke finish is the visual detail.
What’s included
Review what is in the box against your installation plan first.











