Overview
The Pro Comp 44 Series Syndrome 20×9 wheel, part number PXA5044-2936, is a 20-inch aluminum spoke wheel that is 9 inches wide. It has a 6 on 135 bolt pattern and a satin black finish, named in the series as 44 Series Syndrome satin black.
The wheel has a 108 center bore, a -12 offset and a 5 backspacing. It is low-pressure cast and rated at 2500 to 3650 lbs per wheel. The fit is universal, with no vehicle named.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 6 on 135 bolt pattern
- Center bore 108
- Offset -12 with backspacing 5
- Satin black spoke design
Tire sidewall and ride
A 20-inch wheel usually goes with a lower-profile tire, which leaves less sidewall to absorb impacts from rocks, ruts and curbs. Trail use puts more stress on that thinner sidewall, so tire pressure and tire construction deserve attention before a trip.
A -12 offset moves the tire outward, which adds stability at highway speed but can push the tire toward fender flares and suspension parts. Check the wheel through the full steering range and at both ends of suspension travel before driving. Spacer changes and lift kits both shift this geometry, so measure again after any combined change.
Large wheels change how the vehicle feels on loose surfaces, since the tire footprint and sidewall flex differ from smaller setups. Tire pressure adjustments are often made in small steps, with a clearance check after each change.
- Compare the tire load rating with the wheel rating
- Inspect the lip and bead area after rock contact
- Log tire pressure for each trail trip
- Torque wheel bolts after the first few drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5044-2936 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 108 |
| Offset | -12 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel. |
| Style | Spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 44 Series Syndrome |
Vehicle fitment
This 20×9 wheel is not matched to a vehicle and is universal fit. Confirm the 6 on 135 pattern and 108 center bore against the hub, then check that the -12 offset clears the fender and caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pair a 20-inch wheel with a -12 offset only after measuring fender and caliper clearance, since the tire sits farther out than on a zero-offset wheel.
The 6 on 135 pattern and 108 center bore define hub fit. The -12 offset moves the wheel outward and the 5 backspacing sets the inner position, so tire and fender clearance on a 20-inch wheel should be measured before mounting.
The 9-inch width is listed beside the satin black spoke finish.
What’s included
Verify the package contents match your installation before starting.











