Overview
The Pro Comp 44 Series Syndrome 17×9 wheel, part number PXA5044-7973, is a 17-inch aluminum spoke wheel that is 9 inches wide. It has a 5 on 5 bolt pattern and a satin black finish, named in the series as 44 Series Syndrome satin black.
The wheel has a 108 center bore, a -6 offset and a 4.75 backspacing. It is low-pressure cast and rated at 2500 to 3650 lbs per wheel. The fit is universal, so no specific vehicle is matched.
Key features
- Low-pressure cast aluminum
- 17-inch diameter and 9-inch width
- 5 on 5 bolt pattern
- Center bore 108
- Offset -6 with backspacing 4.75
- Satin black spoke design
Choosing a wheel size
A 17-inch wheel with a 9-inch width changes the tire you can mount and the space between the tire and fender. Larger diameters often mean lower-profile tires, which give less sidewall cushion over ruts and rocks, so tire choice matters as much as the wheel itself. A lighter wheel reduces unsprung weight, and a heavier one can make steering feel slower over bumps.
A negative offset sits the wheel further outward, which affects steering feel and the position of the tire at full lock. Spacers and suspension lifts both shift that geometry, so measure again after any combined change. Lug seat style should also match the wheel’s hole design.
Keep a short log of the installed torque, tire pressure and any clearance changes. Trail use can loosen fasteners and move the points where the tire rubs, so a written record makes it easier to spot a change early.
- Measure the hub bore before buying
- Match lug seat style to the wheel holes
- Check steering lock with the wheel mounted
- Retighten lug nuts after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5044-7973 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel. |
| Style | Spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 44 Series Syndrome |
Vehicle fitment
This Syndrome is not assigned to any vehicle and is universal fit. Measure the 5 on 5 hub and the 108 center bore, then compare the -6 offset and 4.75 backspacing with your brake caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A negative offset moves the wheel outward, so check fender and suspension clearance with the wheel mounted before driving.
The 5 on 5 pattern and 108 center bore define hub fit, while the -6 offset and 4.75 backspacing set the position of the wheel face. The 9-inch width and 17-inch diameter describe the wheel size, but the negative offset means fender clearance should be measured after mounting.
What’s included
Compare the package contents with your installation plan before you start.












