Overview
The Pro Comp PXA5163-218347 is a 20×10 aluminum spoke wheel from the Pro Comp 63 Series Recon line, in satin black milled with a 6 on 5.5 bolt pattern. It is sold as a single wheel with a center bore of 108.
This spoke wheel uses low-pressure casting and is rated from 2500 to 3650 lbs per wheel across the Pro Comp alloy line. Its 10-inch width, -18 offset and 4.75 backspacing place the tire outboard of the mounting face, which affects clearance at the fender.
Key features
- Low-pressure cast aluminum
- Spoke face style
- 20-inch diameter and 10-inch width
- 6 on 5.5 bolt pattern
- Center bore of 108
- Offset -18 with 4.75 backspacing
Spoke wheels and brake clearance
Spoke wheels have open areas that catch brake dust, road grime and mud, so cleaning takes a bit more time than on solid faces. Use a soft brush and mild soap, then rinse the spokes and the back of the wheel. Dry thoroughly and avoid abrasive pads that can scratch the finish.
Brake clearance is the main fitment concern for spoke wheels mounted with a negative offset. Check the caliper and rotor against the wheel’s inner face before mounting the tire. Turning the wheel by hand with the tire fitted can reveal rubbing. Inspect spokes after impacts, looking for cracks at the joints, and re-check lug torque after the first drives on new wheels.
- Clean spoke joints where grime builds
- Check caliper clearance with the tire fitted
- Inspect spokes after hard impacts
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5163-218347 |
| Series | 63 Series Recon |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not identify a model. A 6 on 5.5 hub with a 108 center bore is the first match to check, then the -18 offset against the caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only a six-lug hub at 5.5 accepts this wheel. Test-fit the 10-inch rim with the tire mounted, since the -18 offset changes the clearance at the brake caliper and the steering components. Compare the hub pattern with the 6 on 5.5 spacing before ordering, and confirm clearance with the tire mounted.
What’s included
One 20×10 aluminum spoke wheel. Fasteners for your hub are a separate check before installation.











