Overview
The Pro Comp PXA7069-5865 is a 15×8 flat black aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style and a 5 on 4.5 bolt pattern. It is sold as one wheel with a center bore of 83, an offset of -18 and a backspacing of 3.75.
This wheel is low-pressure cast aluminum with a durable flat black finish. Its -18 offset and 3.75 backspacing place the tire position relative to the caliper, which is worth a check with the chosen tire before mounting.
Key features
- Low-pressure cast aluminum construction
- Holes style face
- 15-inch diameter, 8-inch width
- 5 on 4.5 bolt pattern with a center bore of 83
- Offset -18 with 3.75 backspacing
- Flat black finish
Flat black finish upkeep
Flat black finishes hide small road marks but show oil and tire dressing more readily than gloss coatings. Clean the face with a mild soap and water, and avoid harsh solvents that can change the sheen. Wipe off any tire dressing that drifts onto the wheel before it dries. A soft microfiber cloth prevents swirl marks, and a gentle rinse after off-road trips removes mud before it hardens.
The -18 offset and 3.75 backspacing mean the tire sits at a different distance from the caliper than on a centered wheel, so the inner lip gets more exposure to grit from the road. Check the inner barrel and the lip for chips after rough use, and touch up small chips to limit corrosion. Recheck the caliper clearance with the chosen tire before the first drive.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7069-5865 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Flat black |
| Diameter | 15 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | -18 |
| Backspacing | 3.75 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not tie the wheel to a model. The 5 on 4.5 bolt pattern and 83 center bore are the first match to confirm, and the -18 offset requires a check against the caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use a five-lug hub measuring 4.5 across the bolt holes. Test-fit with the tire to confirm the rim clears the brake caliper and steering components, since the offset places the mounting face outboard. Five lug holes on a 4.5 spacing must line up with the hub, and the 83 center bore should seat on the hub pilot. The 8-inch width and -18 offset change how far the tire sits from the fender, so a test fit with the chosen tire is the reliable check. The 3.75 backspacing sets how much room the inner lip has behind the mounting face, which matters for brake caliper clearance. Confirm these measurements on the vehicle before fitting.
What’s included
Use a five-lug hub measuring 4.5 across the bolt holes. Test-fit with the tire to confirm the rim clears the brake caliper and steering parts, since the -18 offset places the mounting face outboard.











