Overview
The Pro Comp 43 Series Sledge 17×9 wheel, part number PXA5143-7973, is a 17-inch aluminum spoke wheel that is 9 inches wide. It has a 5 on 5 bolt pattern and a satin black finish with milled accents, named in the series as 43 Series Sledge satin black and milled.
The wheel uses an 87 center bore, a -6 offset and a backspacing of 4.5. It is built with low-pressure casting and carries a load rating of 2500 to 3650 lbs per wheel. It is universal fit and is not assigned to a vehicle.
Key features
- Low-pressure cast aluminum
- 17-inch diameter and 9-inch width
- 5 on 5 bolt pattern
- Center bore 87
- Offset -6 and backspacing 4.5
- Satin black with milled accents
Clearance on a 17-inch spoke
Spoke wheels leave open gaps that show the brake parts, so brake dust and grime build up on the inner barrel and caliper area more than on solid faces. A regular rinse helps keep the caliper visible for inspection. Look for brake fluid residue, scoring on the rotor, and pads that wear unevenly.
A -6 offset with 4.5 backspacing places the mounting face outward and leaves less room inside the wheel. Measure caliper clearance with the wheel on the hub, then check the inner suspension parts through the spokes at full steering lock.
Milled accents collect road grit in the recessed areas. A soft brush and mild soap clean them well, and a periodic check of the lug nuts and bolt holes helps catch loosening early. Re-torque the lug nuts after the first few drives.
- Measure brake caliper clearance with the wheel mounted
- Check lug nut tightness after the first drives
- Clean recessed milled areas to see wear and cracks
- Inspect spokes for cracks near the hub
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5143-7973 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 87 |
| Offset | -6 |
| Backspacing | 4.5 |
| Load rating | 2500 to 3650 lbs per wheel |
| Style | Spoke |
| Finish | Satin black, milled |
| Construction | Aluminum |
| Series | 43 Series Sledge |
Vehicle fitment
No vehicle is named for this 17×9 Sledge, which is universal fit. Check the 5 on 5 bolt pattern and 87 center bore against the hub, and measure the -6 offset against the brake caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4.5 backspacing leaves less inner room than deeper wheels, so confirm caliper and inner suspension clearance with the wheel mounted before driving.
The 17-inch diameter and 9-inch width describe the wheel size, while the 5 on 5 pattern and 87 center bore define the hub fit. The -6 offset and 4.5 backspacing set the face position, so measure clearance to the caliper before mounting.
What’s included
One 17×9 satin black wheel with milled accents is included. Inspect the package contents against your installation first.











