Overview
The Pro Comp PXA1069-6185 is a 16×10 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 5 on 5.5 bolt pattern. It is sold as one wheel with a center bore of 108 and an offset of -25.
The Vintage wheel is low-pressure cast aluminum with a light build and a durable finish. Its high offset design gives brake clearance, and the 4.5 backspacing completes the fit.
Key features
- Low-pressure cast aluminum
- Holes style face
- 16-inch diameter, 10-inch width
- 5 on 5.5 bolt pattern
- Center bore of 108
- Offset -25 with 4.5 backspacing
Before you buy
Hub centering matters as much as bolt pattern for a wheel like this. The center bore should seat on the hub pilot so the wheel carries its load evenly, and a larger bore can be fitted with a hub-centric ring. Measure the pilot before mounting, since a loose fit can cause vibration that is easy to mistake for a tire problem.
Offset and backspacing decide how the rim sits behind the brake caliper. Look at the caliper and steering parts with the tire fitted, and check that the tire does not contact the inner fender through the full range of travel. Make these checks before the first trail run, not after.
- Measure the hub pilot before mounting
- Use a hub-centric ring when the bore is larger
- Test-fit with the tire at full lock
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-6185 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 16 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -25 |
| Backspacing | 4.5 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not identify a model. Match the 5 on 5.5 bolt pattern and 108 center bore to the hub, then check the -25 offset against the vehicle’s clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A five-lug hub at 5.5 is the only match for this wheel. Test-fit the 10-inch rim with the tire on the vehicle to check that the offset clears the brake caliper and steering parts.
What’s included
One 16×10 aluminum wheel. Lug nuts and a center cap are a separate purchase if your hub requires them.











