Overview
The Pro Comp 48 Series Quick 8 20×9 wheel, part number PXA5148-297050, is a 20-inch aluminum spoke wheel that is 9 inches wide. It is the eight-lug 170 version of the Quick 8, with a satin black milled finish.
This eight-lug version has a 125 center bore, 0 offset and 5 backspacing. Each wheel carries a 2500 to 3650 lb rating and is cast using a low-pressure process. Fitment is universal rather than tied to one model.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 8 on 170 bolt pattern
- Center bore 125
- Offset 0 and backspacing 5
- Satin black milled finish
Eight-lug mounting basics
Eight-lug wheels carry load across more studs, so the hub and the wheel must agree exactly. Even a small mismatch in stud spacing can keep the wheel from seating flat, and a wheel that rides on the studs instead of the hub will vibrate and wear the threads. Look at the hub before shopping and write down its measurements for reference.
Brake clearance deserves attention on any 20-inch wheel. Calipers, rotors and dust shields all sit behind the spokes, and a wheel that clears one caliper may still rub on another part. Measure the caliper with the tire you plan to run, and check the rotor hat if the vehicle has one. Tire load index should also be matched to the wheel’s rating.
- Confirm stud count and spacing on the hub
- Check caliper and rotor clearance behind the spokes
- Match tire load index to the wheel’s rating
- Inspect studs and nut seats when mounting
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5148-297050 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 125 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel |
| Style | Spoke |
| Finish | Satin black milled |
| Construction | Aluminum |
| Series | 48 Series Quick 8 |
Vehicle fitment
This eight-lug wheel is universal fit. Confirm the 8 on 170 hub and 125 center bore before ordering, and check caliper clearance for the 20-inch size.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An eight-lug 170 pattern cannot be swapped for a five- or six-lug layout, so confirm the hub first. Measure the caliper with the tire you plan to run.
The 8 on 170 eight-lug layout and the 125 center bore define the hub fit. The 0 offset and 5 backspacing keep the face centered, and the 20-inch, 9-inch wheel requires caliper room and tire diameter to be checked before mounting.
What’s included
One 20×9 wheel in satin black milled. Confirm the package contents, including lug hardware and center caps, before fitting.











