Overview
The Pro Comp 41 Series Phaser 18×9 wheel, part number PXA5041-898355, is an 18-inch aluminum split spoke wheel with a 9-inch width. It uses a 6 on 5.5 bolt pattern and a satin black finish, with the series named as 41 Series Phaser satin black.
The wheel pairs a 114 center bore with a positive 12 offset and a 5.5 backspacing. Positive offset is the main difference from the zero-offset 18×9 Phasers in the line, since it changes where the wheel face sits. It has no vehicle assigned.
Key features
- Low-pressure cast aluminum
- 18-inch diameter and 9-inch width
- 6 on 5.5 bolt pattern
- Center bore 114
- Offset 12 with backspacing 5.5
- Satin black split spoke design
Center bore and hub centering
The center bore is the hole that fits over the hub. When the bore is larger than the hub, the wheel rides on the lug studs and can wobble or vibrate at speed. Hub-centric rings are sleeves that fill the gap so the wheel centers on the hub. They are sized to bore and hub, so check both dimensions before buying.
Positive offset changes the load path into the wheel bearings, so a proper centering fit matters. Tighten the nuts in a star pattern after mounting and recheck them after the first short drive. Inspect the bore for corrosion before fitting, since rust can stop the wheel from seating cleanly.
- Compare hub size with the bore
- Use hub-centric rings only if sized to fit
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5041-898355 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 114 |
| Offset | 12 |
| Backspacing | 5.5 |
| Style | Split spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 41 Series Phaser |
Vehicle fitment
No vehicle is named for this wheel. Check the 6 on 5.5 pattern and 114 center bore against the hub, then measure the positive 12 offset against the inner clearance of the brake caliper and suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With a positive offset, the wheel sits closer to the suspension than a zero-offset wheel, so inner clearance is the check to make before driving.
The 114 center bore must suit the hub, and the 12 offset places the wheel further inward. Check the 6 on 5.5 pattern and inner clearance before mounting.
What’s included
Covered: one 18×9 wheel in satin black, with no accessories named. It names no center caps or lug nuts.











