Overview
The Pro Comp 46 Series Prodigy 18×9 wheel, part number PXA7046-8936, is an 18-inch aluminum spoke wheel with a 9-inch width. It uses a 6 on 135 bolt pattern and a satin black finish.
The wheel has an 87 center bore, a 0 offset and a 5 backspacing. Xtreme alloys are made from aerospace alloys using Counter Pressure Casting, and they include center caps. Hub measurements decide the fit.
Key features
- Aerospace alloy construction using Counter Pressure Casting.
- 18-inch diameter and 9-inch width
- 6 on 135 bolt pattern
- Center bore 87
- Offset 0 and backspacing 5
- Satin black spoke design
Measuring a six-lug 135 hub
Six-lug 135 hubs are common on heavier trucks and some SUVs, and the bolt holes and pilot diameter must line up with the wheel together. A center bore that is too small will not seat, while one that is too large usually calls for hub-centric rings. Measure the pilot, the bolt circle and the hub face before choosing the wheel.
Wheel bearings, ball joints and tie-rod ends take the load that a larger wheel and tire combination puts on the hub. When a new wheel goes on, look at these parts for play and cracked boots.
A wheel with a 0 offset can make steering feel more direct than one pushed far inward, though the tire, brake and suspension setup has the biggest effect. Rotate the tires on schedule and keep the wheel bearings serviced as your service schedule requires.
- Measure the pilot diameter before fitting
- Use hub-centric rings only when the bore is larger
- Inspect ball joints for play
- Check lug nut torque after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7046-8936 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 46 Series |
Vehicle fitment
No vehicle is named for this 18×9 wheel, which is universal fit. A 6 on 135 hub with an 87 center bore is the match to confirm before buying, and the 18-inch diameter should be checked against caliper room.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Six-lug 135 hubs need bolt holes and a center bore that both fit the wheel, so measure the hub first and then test-fit the wheel with the caliper in place.
The 6 on 135 pattern and 87 center bore come first in any fit check, since they set whether the wheel seats on the hub.
Xtreme alloy wheels are aerospace alloy wheels made with Counter Pressure Casting, and the line suits sport utility vehicles. This 18×9 version has a 0 offset and 5 backspacing, so the face sits at the center of the width.
The 6 on 135 pattern and 87 center bore are the hub figures to confirm first. Since no vehicle is named and the wheel is universal fit, measuring the hub and the brake clearance for your own vehicle is the reliable way to check fit before buying.
What’s included
Look over the package contents before beginning installation.











