Overview
The Pro Comp PXA5175-798337 is a 17 x 9 inch satin black beadlock wheel in the 75 Series Trilogy Race style. Its bolt pattern is 6 on 5.5, its center bore is 108, its offset is -30 and its backspacing is 3.75. The beadlock ring is a separate forged piece that clamps the tire bead to the rim, so the bead stays in place at low air pressure.
The -30 offset and 3.75 backspacing place the wheel and tire further out than the -6 and 4.75 version, which changes clearance. Match the bolt pattern and offset to your vehicle before buying.
Key features
- Satin black face
- Eight-spoke Trilogy Race design
- Beadlock ring forged from 6061 aircraft grade aluminum
- Ring about twice the thickness of the original, per the manufacturer
- Fully countersunk Grade 8 bolts
- NORDLOCK washers on the ring hardware
- Diamond knurl pattern on the ring
- Figure eight pattern on the bead area
Offset changes the tire position
Offset and backspacing control how far the wheel sits from the hub and how far the tire sits from the fender. A negative offset of this size moves the tire outward, which increases the load on wheel bearings and steering parts and can change how the vehicle tracks on uneven ground. Measure clearance with the tire mounted and the suspension loaded.
Care is mostly about the hardware. Keep the ring bolts torqued, check the valve stem position after each mount, and look for rubbing marks on the tire sidewall. Avoid stacking spacers to gain clearance, since extra thickness adds stress to studs and lug nuts.
- Check fender clearance at full lock
- Inspect wheel bearings after a larger offset change
- Recheck ring bolt torque after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5175-798337 |
| Wheel size | 17 x 9 inch |
| Style | Trilogy Race beadlock, 75 Series |
| Finish | Satin black |
| Construction | Aluminum |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -30 |
| Backspacing | 3.75 |
Vehicle fitment
Compare the 6 on 5.5 pattern and the -30 offset with your vehicle’s wheel specifications before ordering. The offset moves the wheel further out than a -6 offset would, so check the fit against your vehicle’s year, model and trim.
Check the fender and suspension clearance with the tire you plan to run, because a -30 offset with 3.75 backspacing changes where the tire sits. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the bead with the ring in place, then check the ring hardware and retorque the bolts with the washers. Confirm the valve stem clears the brake parts and the wheel clears the steering components at full lock before the first off-road run. Measure the clearance with the wheel mounted, since a -30 offset moves the tire outward and the fender is the first place to check.
What’s included
The wheel comes with its beadlock ring hardware, including Grade 8 countersunk bolts and NORDLOCK washers. No tire is included.











