Overview
The Pro Comp PXA1069-5165 is a 15×10 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 5 on 4.5 bolt pattern. It is sold as one wheel with a center bore of 87.
These Vintage alloys are low-pressure cast aluminum and come in black, chrome or polished finishes. This polished model carries a -47 offset and a 3.65 backspacing, and the line’s high offset design is meant to help brake clearance on sport utility vehicles.
Key features
- Low-pressure cast aluminum
- Holes style face
- 15-inch diameter, 10-inch width
- 5 on 4.5 bolt pattern with a center bore of 87
- Offset -47 with 3.65 backspacing
- Polished finish
Tire choice and sidewall room
On a 10-inch-wide rim, tire selection controls how the sidewall and tread sit against the fender. A tire with a stiffer sidewall keeps its shape under load, while a soft tire can roll inward at full lock. Choose a size and load rating made for this rim width, and read the tire’s maximum width rating before buying.
Polished faces need the same care as any aluminum wheel. Clean brake dust off the spokes promptly, since it can etch the finish over time. Inspect the lip after rough trail use, and look for bent edges or cracks that could affect how the tire seats.
- Confirm the tire width rating for the rim
- Test steering lock with the tire mounted
- Clean brake dust promptly
- Inspect the lip after rough use
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-5165 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 15 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 87 |
| Offset | -47 |
| Backspacing | 3.65 |
Vehicle fitment
Match the 5 on 4.5 pattern and 87 center bore to the hub first, then check the -47 offset against brake and steering parts.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A five-lug hub at 4.5 is required, and the 87 center bore has to seat on the hub. Because the offset is deep, test-fit the polished rim with the tire to confirm inner clearance. The polished finish is a cosmetic choice and does not change fitment, which depends on the 5 on 4.5 spacing, the 87 center bore and the -47 offset. The 10-inch width and 3.65 backspacing place the tire far outboard, so measure fender clearance before the first trip. Pair the rim with a tire that suits a 10-inch-wide wheel, and check it at full steering lock. A hub with the wrong pilot size will not center the wheel, so measure the pilot before fitting.
What’s included
One 15×10 aluminum wheel. Sort the package contents before starting the fitting.











