Select your vehicle

Pro Comp 4″ Stage II Lift Kit with Monotube Shocks – K2096BP

Pro Comp Suspension

Shop Ram 2500 Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2014–2018 Ram 2500
  • 4-inch Stage II lift kit, 4–5.5 inch lift height range
  • Monotube front and rear shocks included
  • Rear block and spacer lift

Description

Overview

The Pro Comp K2096BP is a 4-inch Stage II lift kit with monotube shocks for the 2014–2018 Ram 2500.

A lift kit raises the vehicle body and suspension height to give more fender clearance for larger tires. Pro Comp’s K2096BP is a stage 2 kit with a lift height range of 4–5.5 inches, a block and spacer rear lift method, and monotube shocks front and rear.

The new 4-inch and 6-inch Ram suspension kits are designed to work alongside the truck’s driver-assist technology, including blind spot monitoring, surround view cameras, lane departure warnings, smart cruise control and guided parking.

Key features

  • 4-inch Stage II lift kit
  • Lift height range of 4–5.5 inches
  • Monotube shocks included, front and rear
  • Rear lift by block and spacer
  • Direct-fit design for the 2014–2018 Ram 2500
  • Pro Comp states compatibility with the truck’s driver-assist technology

Living with a stage 2 lift

A stage 2 lift kit changes the geometry the truck was built around, so the effects show up in daily driving as well as off road. Steering response, braking feel and highway stability all shift a little once the body and suspension sit higher. Most owners notice the difference during the first weeks of driving, when new components settle and the handling becomes familiar again.

Taller suspension also puts more load on related parts. Ball joints, tie rod ends and driveline joints often see more angle than before, so inspecting them during regular service is worthwhile. Many shops replace worn brake lines and sway bar links at the same time as the lift, since the original parts were never designed for the new travel.

  • Inspect ball joints and tie rod ends at each oil change
  • Look for leaks at shock mounts after rough trail use
  • Re-check block and spacer bolts after the first trips
  • Ask about extended brake lines if the stock lines feel tight

Specifications

Brand Pro Comp Suspension
Part number K2096BP
Product type Suspension lift kit
Lift kit 4 inch, stage 2
Lift height range 4-5.5 inches
Shocks included Yes
Front shocks Monotube
Rear shocks Monotube
Rear lift method Block/spacer
Rear lift component Spacer
Fitment type Direct fit

Vehicle fitment

The manufacturer fitment list for the Pro Comp K2096BP lift kit covers this vehicle:

  • 2014–2018 Ram 2500 (Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, SLT, Tradesman)

The list does not include the Ram 3500, the Ram 1500 or Ram 2500 model years before 2014 and after 2018. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

  • A 4″ lift changes ride height and geometry, so have a qualified shop install the kit with the vehicle on jack stands.
  • Go back over every bolt after the first miles on the road, since new suspension hardware can settle.
  • Get an alignment after the lift and verify brake hose, steering and driveline clearance at full droop and compression.
  • Check state and local rules on lifted vehicle height before taking it on public roads.
  • Check brake line length, driveline angles and steering stops after lifting the vehicle.

What’s included

  • Monotube front shocks
  • Monotube rear shocks
  • Rear lift spacer

Not included: Check the hardware on hand against the installation steps before starting.

SKU: EXPK2096BP Categories: ,

Fitment

VehicleYearsTrims
Ram 25002014–2018Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, SLT, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Pro Comp K2096BP fit a 2018 Ram 2500?

Yes. The manufacturer fitment list for the K2096BP covers the 2014–2018 Ram 2500, in the trims shown in the Fitment tab. Confirm your trim and drivetrain before installing.

How much lift does the Pro Comp K2096BP give?

The K2096BP is a 4-inch stage 2 lift kit with a lift height range of 4–5.5 inches. The rear lift uses a block and spacer.

Does the K2096BP include shocks?

Yes. The K2096BP includes monotube shocks for both the front and the rear, so no separate shock purchase is needed to complete the lift.

Does the K2096BP work with the Ram 2500's driver-assist features?

Pro Comp says its 4-inch and 6-inch Ram suspension kits are completely compatible with the truck's technology, including blind spot monitoring, surround view cameras and lane departure warnings.

How often should a lift kit be inspected?

Inspect it after the first few drives and then at each regular service. Look for loose hardware, shock leaks, worn bushings and any rubbing against brake lines or the driveline. Trucks used hard off road may need more frequent checks, so keep notes on what you find.

Do monotube shocks need different care than twin-tube shocks?

Care is much the same for both designs. Keep the shock bodies clean, check the seals for oil seepage, and replace the shocks when damping feels weak or the ride starts to bounce. Monotube designs are often chosen for steady heat handling, but any shock still needs regular inspection after a lift.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 2500 Lift Kits on Amazon