Overview
The Pro Comp 6 Inch Lift Kit with ES9000 Shocks, part number K1143B, is a 6-inch knuckle lift for the 2007-2013 Chevrolet Silverado 1500 and GMC Sierra 1500. The front lift uses strut spacers and spindles, with front and rear crossmembers, compression struts and sway bar drop brackets. The rear uses a block, U-bolt and add-a-leaf kit.
The front shocks are reused factory units. The kit includes brake line extension brackets, and the lift height range is 5 to 6.99 inches. Confirm the shock setup for your truck before installing.
Key features
- 6-inch stage 1 knuckle lift
- Front strut spacers and spindles
- Front and rear crossmembers
- Compression struts and sway bar drop brackets
- Bump stops
- Rear block, U-bolt and add-a-leaf kit
- Brake line extension brackets
Strut spacer lift tradeoffs
Strut spacer lifts raise the truck by changing the front strut mounting point, so the spindle and crossmember geometry shift with the new height. Camber and caster should be checked and set after installation, since the front wheels can move out of specification. Compression struts and sway bar drop brackets also affect how the front end loads at the new height.
The rear block, U-bolt and add-a-leaf kit lifts the back of the truck and changes the rear spring rate, so the ride may feel firmer under light loads. Check the brake line extension brackets and the driveshaft angle after installation. Worn ball joints, tie rods and wheel bearings are worth inspecting while the front end is apart.
- Set camber and caster after installation
- Check brake line brackets for rubbing
- Inspect ball joints while the front is open
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1143B |
| UPC | 614901122657 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Rear lift | Block, U-bolts and add-a-leaf |
| Front shocks | Reuse OEM |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007-2013 Chevrolet Silverado 1500 (LS, LT, LTZ, WT and XFE) and the 2007-2013 GMC Sierra 1500 (Denali, SL, SLE, SLT, WT and XFE).
The 2500 and 3500 series trucks, and 2006 and earlier or 2014 and later 1500 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Knuckle and strut spacer lifts change front geometry, so have the alignment and driveline angles checked after installation.
What’s included
It includes strut spacers, spindles, front and rear crossmembers, compression struts, sway bar drop brackets, bump stops, brake line extension brackets, and a rear block, U-bolt and add-a-leaf kit. The front shocks are reused factory units.






























