Overview
The K1059T is a stage 1 lift kit with a block and spacer rear lift and ES3000 front and rear shocks. It is built for 1976–1986 Chevrolet K20 and GMC K25 and K2500 trucks, plus several Suburban models of the same era.
The stage 1 lift is 2.5 inches, with a lift height range of 0 to 3.5 inches. Check the lift height for your application before choosing a tire size.
The kit uses ES3000 shocks at both the front and rear, and the tire size is 33 inches.
Key features
- Stage 1 lift kit
- Block and spacer rear lift method
- ES3000 front and rear shocks included
- Listed lift height range of 0 to 3.5 inches
- Listed tire size of 33 inches
Block and spacer lifts
A block and spacer lift raises the rear of the truck by adding spacers between the axle and the springs, so the factory springs stay in place. That makes it simpler than a full suspension swap, but it still changes the geometry. Pinion angle, driveline length and brake line length should be reviewed after the lift is installed.
Because the lift is only part of the setup, the shocks, bump stops and tire size all work together. Shocks that are too short for the new height can limit travel. Check the shock labels on arrival, and look for wear on the spacers and U-bolts during routine service.
- Check pinion angle after installation
- Re-torque U-bolts after the first drives
- Look for rubbing at the tire and fender
- Inspect spacers for cracks or wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1059T |
| Suspension type | Lift kit |
| Lift | 2.5 in stage 1 |
| Lift height range | 0 to 3.5 in |
| Rear lift method | Block and spacer |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shocks included | Yes |
| Tire size | 33 in |
Vehicle fitment
The kit fits the 1976–1986 Chevrolet K20 and its Suburban, the 1976–1978 and 1979–1986 GMC K25 and K2500 and their Suburbans, and the 1986 GMC C2500 Suburban. Trucks from 1987 onward are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A block and spacer lift changes ride height and suspension angles, so have the alignment and driveline angles checked after installation.
What’s included
The stage 1 lift kit with ES3000 front and rear shocks.













