Overview
The Pro Comp K4176BP is a 6-inch Stage II lift kit with Pro Runner shocks for the 2011–2016 Ford F-250 Super Duty. It uses replacement radius arms made of 4130 Chromoly tubing and 3/16 inch thick steel plate, with specific rate coil springs at the front.
The rear is lifted with lift blocks, U-bolts and add-a-leafs, and a drop Pitman arm corrects the steering. The front shock package in this version is Pro Runner, and the kit also includes a front track bar bracket and sway bar links.
Key features
- 6-inch lift height, Stage II
- Replacement radius arms of 4130 Chromoly tubing
- 3/16 inch thick steel plate radius arms
- Specific rate coil springs and spacers
- Drop Pitman arm steering correction
- Lift blocks, U-bolts and add-a-leafs at the rear
Radius arm material and care
Chromoly tubing is a common choice for radius arms because it combines strength with a lighter weight than many alternatives. Steel plate ends and mounts carry the load into the frame, and the welds deserve a close look after the first trail runs. Check for cracks near the welds and any movement at the bushing sleeves.
Specific rate coil springs are matched to the weight and stance of the truck, so swapping them for a different rate changes the ride and load capacity. Pitman arms and track bar brackets also affect steering and axle position, so they should be inspected together with the arms. Keep an eye on the ball joints and track bar bushings, which take extra load at this height.
- Inspect radius arm welds for cracks
- Check track bar bushings for wear
- Confirm spring seating after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4176BP |
| UPC | 70000637860 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 2 |
| Suspension type | Radius arm or radius arm brackets |
| Front lift | Specific rate coil springs and spacers |
| Radius arm material | 4130 Chromoly tubing with 3/16 inch thick steel plate |
| Steering correction | Pitman arm |
| Rear lift | Lift blocks, U-bolts and add-a-leaf |
| Front shocks | Pro Runner |
Vehicle fitment
It fits the 2011–2016 Ford F-250 Super Duty, in the King Ranch, Lariat, Platinum, XL and XLT versions.
Only the 2011 through 2016 model years are on the list. Other Super Duty generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacement radius arms and a drop Pitman arm change the front geometry, so schedule the alignment and driveline angle check once the kit is in.
What’s included
The kit includes replacement radius arms, specific rate coil springs and spacers, the drop Pitman arm, the front track bar bracket, sway bar links, lift blocks, U-bolts and add-a-leafs, and Pro Runner front shocks.









