Overview
The Pro Comp K2200T is a 6-inch stage 2 radius arm lift kit with front and rear PRO-X shocks for the 2014–2018 Ram 2500. It is a direct fit for the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman versions.
The kit is built on cast and CNC-machined knuckles and laser-cut, CNC-formed, robotically welded crossmembers. It includes brake line extensions, longer bump stops and sway bar drop brackets, which are the parts that set steering geometry and suspension behavior at the new height.
Key features
- 6-inch radius arm lift for the 2014–2018 Ram 2500
- Cast and CNC-machined knuckles
- Laser-cut, CNC-formed and robotically welded crossmembers
- Brake line extensions, longer bump stops and sway bar drop brackets are included
- Front and rear PRO-X shocks
Brake lines and bump stops
A higher suspension moves the wheels farther from the frame, so brake hoses and ABS wiring need enough slack to flex through full suspension travel. Longer extensions are often fitted with a radius arm lift so the hose is not pulled tight at full droop. Bump stops are the last contact point before the axle reaches the frame, and longer units change how the truck handles rough roads.
Sway bar drops reduce roll stiffness at the new height, so the links and bushings should be checked once the truck has settled. Heavy trucks used for towing see more stress through these parts, so regular inspection matters more than on a light-duty setup. Replace any hose that shows chafing or hardness.
- Check brake hose slack at full droop
- Inspect bump stop contact points after rough trips
- Look for worn sway bar drop bushings
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2200T |
| Suspension type | Radius arm lift kit, stage 2 |
| Lift height | 6 inches |
| Shocks | Front and rear PRO-X |
| Knuckles | Cast and CNC-machined |
| Crossmembers | Laser-cut, CNC-formed and robotically welded |
| Fitment | Direct fit for the 2014–2018 Ram 2500 |
Vehicle fitment
It fits the 2014–2018 Ram 2500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman versions.
It covers the 2014–2018 Ram 2500 only. Verify year, model and trim on your own truck before ordering.
Installation notes
A stage 2 radius arm kit changes the front and rear geometry of the truck, so have the alignment and driveline angles checked once the install is finished.
What’s included
Cast and CNC-machined knuckles, laser-cut, CNC-formed and robotically welded crossmembers, front and rear PRO-X shocks, and brake line extensions, longer bump stops and sway bar drop brackets.













