Overview
The K2104T is a 6-inch stage 1 suspension lift with PRO-X front and rear shocks for the 2019–2020 Ram 1500. The rear uses a spacer as its lift component, and the lift height range is 6 to 7 inches. The shocks come with the kit.
The 2019 Ram 1500 system is built around a Pro Comp-engineered knuckle designed for better steering geometry, reduced weight and a tighter turning radius. Crossmembers, diff drops and sway bar drops are matched to it to help keep OEM operating angles on critical components.
Key features
- New Pro Comp-engineered knuckle for the 2019 platform.
- Robust crossmembers, diff drops and sway bar drops
- Rear geometry correction brackets and coil spacers.
- PRO-X front and rear shocks, included
- Compatible with factory stability control and adaptive cruise control.
Tire clearance and checks
A spacer lift and a 37-inch tire are a common pairing on this type of truck, but the two need to be checked together. Clearance at full steering lock and at full compression decides whether the tire rubs, so test both before the first long drive. Fender liners, the inner wheel well and the brake lines should all have room to move.
Keep an eye on the rear as well as the front, since the spacer changes how the axle travels. Check the driveline, alignment and tire pressure after any change in tire or wheel size. Over time, rubbing marks on the fender lip or shiny spots on the tire sidewall show the clearance is tighter than planned, which is worth correcting early.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2104T |
| Suspension type | Lift kit, 6-inch stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-X |
| Rear shocks | PRO-X, included |
| Rear lift component | Spacer |
| Tire size | 37 inches, listed |
| Shocks included | Yes |
Vehicle fitment
It fits the 2019–2020 Ram 1500 in the Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel, Special Service and Tradesman versions.
The fit covers the 2019 and 2020 Ram 1500, so 2021 and newer trucks fall outside it, and the Ram 2500 and 3500 are not part of it. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The spacer lift changes the rear ride height, and the 37-inch tire size is a listed figure for this kit, so check the driveline angles, the alignment and the tire clearance once it is in.
What’s included
PRO-X front and rear shocks, the rear coil spacers, and the knuckle, crossmember, diff drop and sway bar drop parts that Pro Comp describes for the system.






















