Overview
The Pro Comp PXA7031-2985 is a 20×9 split-spoke aluminum wheel in the 31 Series Stryker line, finished in matte black. It is built on a 5 on 5.5 bolt pattern with a center bore of 108, an offset of 0 and a backspacing of 5.
Within the 20-inch Stryker group, the 5 on 5.5 pattern pairs with the 108 bore, while the 5 on 150 version uses a 114 bore. The series is cast aluminum made with low-pressure casting.
The 5 on 5.5 pattern and 108 center bore decide whether the wheel mounts to the hub. A 20-inch rim is larger than most stock wheels, so tire size, load rating and brake clearance need to be checked before the wheel is installed.
The matte black split-spoke face and aluminum construction are the listed features. The 0 offset and 5 backspacing place the face near the centerline of the wheel.
This wheel is cast aluminum made with low-pressure casting, and the 20×9 size is made for the 5 on 5.5 pattern only.
The 108 center bore and 5 on 5.5 pattern are the two numbers to verify, and the 9-inch width needs a tire that suits a 20-inch rim. Brake caliper clearance and the inner suspension should both be checked before mounting.
Key features
- 20-inch split-spoke face
- Matte black finish
- 5 on 5.5 bolt pattern
- Center bore 108
- Offset 0
Before mounting a wheel
A wheel is only one part of a mounting job. Before it goes on, the bolt pattern, center bore and offset should be checked against the vehicle, because a wheel that is close but not matched can vibrate, rub or sit unevenly on the hub. The center bore keeps the wheel centered on the hub, while the bolt pattern decides whether the lug studs line up at all.
A large rim leaves less sidewall for the tire, so the ride is firmer and the tire is more exposed to rock strikes on the trail. Recheck fender and brake caliper clearance after the first drive, since the suspension can settle and change the space around the wheel.
- Lug nuts or bolts that show seat wear
- Tire load rating matched to the rim
- Wheel face checked for cracks after rough use
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7031-2985 |
| Diameter | 20 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Split spoke |
| Finish | Matte black |
| Construction | Aluminum |
| Series | 31 Series Stryker |
Vehicle fitment
Pro Comp gives this wheel a universal fit label. Check the 5 on 5.5 bolt pattern, the 108 center bore and the 0 offset against the truck, and confirm the tire size before mounting a 20-inch rim.
Choose tires that suit a 20-inch rim that is 9 inches wide. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One wheel. Review the box contents against your installation plan before starting.











