Overview
The Pro Comp K4178M is a 6-inch stage 2 lift kit with PRO-M front and rear shocks for the 2011–2016 Ford F-250 Super Duty. The lift height range is 6 to 7 inches, and the shocks come with the kit. It fits the King Ranch, Lariat, Platinum, XL and XLT versions.
The rear uses a block/spacer method with block and U-bolt components and add-a-leaf hardware. The stage 2 setup includes replacement radius arms built from 4130 Chromoly tubing and 3/16-inch steel plate, designed to improve ride quality over stock. Laser cut brackets, a drop pitman arm and specific rate coil springs are included for the 2011 and newer Super Duty F-250.
Key features
- Replacement radius arms of 4130 Chromoly tubing
- Radius arm material of 3/16-inch thick steel plate
- Laser cut brackets and a drop pitman arm
- Specific rate coil springs that raise ride height
- PRO-M front and rear shocks, included
Choosing a lift height
Lift height affects tire clearance, center of gravity and how the truck handles on pavement. A taller setup gives more room for larger tires and better approach angles on uneven ground, but it also raises the truck’s center of gravity and can change steering response. Think about how much tire size you plan to add and whether the rest of the drivetrain can handle the new angles.
Stage 2 kits are usually chosen by owners who want more suspension travel and a firmer, more controlled ride. Before buying, consider whether the rest of the front end, brakes and driveline will be upgraded at the same time, since these parts often wear faster once the truck sits higher.
- Plan tire size before choosing the final height
- Check brake line length after installation
- Review driveshaft angles with the new ride height
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4178M |
| Suspension type | Lift kit, 6-inch stage 2 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-M |
| Rear shocks | PRO-M, included |
| Radius arms | Replacement, 4130 Chromoly tubing |
| Rear lift method | Block/spacer with block and U-bolt and add-a-leaf |
| Shocks included | Yes |
Vehicle fitment
It fits the 2011–2016 Ford F-250 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT versions, including the XLT trim.
Fitment ends with the 2016 model year and covers the F-250 Super Duty only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Replacement radius arms change the rear axle position, so have the driveline angles and the alignment checked after the kit is installed.
What’s included
Replacement radius arms, PRO-M front and rear shocks, and the block and U-bolt rear lift components with add-a-leaf hardware.













