Overview
The Pro Comp K5100BX is a 1.5–2.5 inch performance suspension system for the 2007–2021 Toyota Tundra in several trims. It is an Explorer low center of gravity suspension system with a lift height range of 0 to 3.5 inches and a 35-inch tire size.
The kit is built for owners who want to run 35-inch tires while keeping OE ride quality for everyday driving. It includes PRO-VST coilovers at the front and PRO-VST rear shocks.
It suits a truck driven on the road during the week and off-road on weekends. Confirm coilover and shock lengths against your truck before ordering, since the shocks carry only the PRO-VST series name.
Key features
- Lift height range 0 to 3.5 inches
- PRO-VST front and rear shocks included
- Listed tire size 35 inches
- Lift kit suspension type
- Direct fit to the listed Tundra trims
Choosing a lift height
A lift height choice shapes how the truck handles, how much room the tires have, and how much work goes into the install. Start by measuring the current height at each corner so you know where the truck sits in the range before you buy. Trucks that carry gear or tow often settle lower under load, so measure with the bed as you normally use it.
Coilover and shock length matter just as much as the lift itself. Shocks that are too short can bind at full droop, while long ones can be overextended on rebound. Brake lines, sway bar links and driveshaft angle are often affected by a height change, so inspect them after the first drive. Pair the new suspension with an alignment and a check of the steering components, and keep the first drives gentle while you recheck the fasteners after the first few trips.
- Measure ride height at all four corners
- Check brake lines and sway bar links after the first drive
- Recheck torque on fasteners after the first few trips
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5100BX |
| Suspension type | Lift kit |
| Shock series | PRO-VST |
| Front shocks | PRO-VST |
| Rear shocks | PRO-VST |
| Shocks included | Yes |
| Lift height range | 0 to 3.5 in |
| Tire size | 35 in |
Vehicle fitment
It is a direct fit for the 2007–2021 Toyota Tundra in the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5 and Trail trims.
Tundra model years before 2007 and after 2021 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A lift kit changes suspension geometry, so plan a wheel alignment after installation and check the driveline angles. Measure the installed lift height against the 0 to 3.5 inch range in the specifications before ordering.
What’s included
Front and rear PRO-VST shocks are included. Check the other kit components, such as springs, brackets and hardware, against your installation before starting.
Not included: tires and wheels.












