Overview
The Pro Comp K4130B is a 6-inch Stage I suspension lift kit with ES3000 shocks for the 2000–2004 Ford Excursion. It lifts the front with coil springs and the rear with springs and U-bolts, and it includes radius arm brackets for the front end.
The Stage I design uses coil springs at the front, with bump stop extensions and a Pitman arm correcting the steering geometry for the raised height. Shock boots are not included in this kit.
Key features
- 6-inch lift height
- Front coil springs for the lift
- Radius arm brackets on the front suspension
- Bump stop extensions for extended travel
- Pitman arm steering correction
- Rear springs and U-bolts
Stage I ride and maintenance
A Stage I setup keeps the ride closer to the factory feel than a heavier build, which suits a truck driven daily. Coil springs at the front and leaf springs at the rear work together with the bump stop extensions, and the extensions only come into play when the suspension compresses hard. That makes the stops worth watching, since they are a wear item.
Big Excursions are heavy, so the rear leaf springs and U-bolts carry a lot of load. Check the U-bolt nuts after the first few drives and at regular service intervals, and look for leaf pack shift or broken leaves. Shock performance also changes the ride, so inspect the ES3000 units for leaks or noise at the same time.
Tires may need attention with a raised body and a Pitman arm steering correction, because wear patterns can change. Rotate and balance them on the usual schedule, and keep the alignment checked after any front component work.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4130B |
| UPC | 614901125481 |
| Lift kit stage | Stage I |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Front lift | Coil springs |
| Front control | Radius arm brackets |
| Steering correction | Pitman arm |
| Rear lift | Leaf springs with U-bolts |
| Shocks | ES3000 front and rear |
| Shock boots | Not included |
Vehicle fitment
This kit fits the 2000–2004 Ford Excursion, including the Eddie Bauer, Limited, XLS and XLT versions of those years.
Other Ford models and the 1999 and earlier Excursion-era trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the front uses radius arm brackets, the axle location changes and the alignment and driveline angles should be checked after the install.
What’s included
The kit includes front coil springs, radius arm brackets, bump stop extensions, a Pitman arm steering correction, rear springs and U-bolts, and ES3000 front and rear shocks.
Not included: shock boots.









