Overview
The Power Stop K1885-36 is a front Heavy Duty Truck and Tow brake kit for the 1999 Ford F-250 Super Duty and F-350 Super Duty. It combines slotted and cross-drilled rotors with Z36 high-friction metallic pads and is supplied without calipers.
Power Stop built the Z36 kit for heavy-duty braking in wet, hot and hilly conditions and for towing at maximum weight. The rotors are coated, no brake lines are supplied, and it is a direct-fit kit. A drilled rotor has holes through its friction face and a slotted rotor has grooves cut across it, and the K1885-36 uses both. Because only the 1999 model year is covered, owners of other Super Duty years should choose a kit matched to their own year. Related Z36 kits for the rear axle and for both axles carry different part numbers. Brake work on a heavy truck is best left to a qualified technician.
Key features
- Front axle kit built around slotted and cross-drilled rotors.
- Z36 high-friction metallic pads supplied with the rotors.
- It covers the 1999 model year only, on both Super Duty trucks.
- Rotors carry a coating.
- No calipers and no brake lines are packed with the K1885-36.
Single year fit and front brakes
Front brakes do most of the stopping on many trucks, so the front hubs and calipers deserve attention when the rotors are changed. Check the wheel bearings for play, the hub face for rust or scoring, and the caliper slide pins for smooth movement. Any seized pin or leak should be fixed before the new rotors go on, since uneven clamping wears rotors quickly.
A single-year kit has a narrow fit range, so match the truck’s model year exactly before ordering. Front rotors and pads are replaced as a set, and the existing calipers and brake lines stay in place. Heavy towing and hilly driving put extra heat into the front brakes, so pads with high-friction compounds are often chosen for that work.
- Check the wheel bearings for play
- Inspect caliper slide pins for smooth movement
- Match the model year exactly before ordering
- Clean the hub face before fitting rotors
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1885-36 |
| UPC | 792088564917 |
| Product type | Heavy duty truck and tow brake kit without calipers |
| Brake position | Front |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1999 Ford F-250 Super Duty and F-350 Super Duty, in Lariat, XL and XLT trims.
- 1999 Ford F-250 Super Duty (Lariat, XL, XLT)
- 1999 Ford F-350 Super Duty (Lariat, XL, XLT)
Only 1999 is listed, so other Super Duty model years are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The K1885-36 handles the front brakes only. Front rotors and pads are exchanged together, and the calipers and brake lines on the truck are kept.
What’s included
The K1885-36 contains slotted and cross-drilled rotors and Z36 high-friction metallic pads for the front axle.
Not included: Calipers and brake lines.









