Overview
The Power Stop Evolution AR83075XPR (part number PSTAR83075XPR) is a pair of rear drilled and slotted brake rotors for the 2011–2020 Dodge Durango and the 2011–2020 Jeep Grand Cherokee.
The rotor is solid cast iron with 5 lugs. It is machined and mill-balanced and has a silver zinc dichromate coating, and it is made for vehicles with solid rear rotors.
This part keeps a solid rear disc design. Power Stop limits it to vehicles with solid rear rotors, so a Durango or Grand Cherokee with vented rear rotors needs a different part number.
Run-out describes how much a rotor wobbles as it turns, and disc thickness variation (DTV) describes how much its thickness differs around the face. Lower figures for both generally point to a smoother pedal.
Key features
- For models with solid rear rotors
- Precision drilled holes allow rotor cooling
- Rounded slots wipe away gas and debris
- Silver zinc dichromate plating, except on hub assemblies
- Machined and mill-balanced; maximum run-out 0.0032 in (0.08 mm)
- Maximum DTV tolerance 0.0005 in (0.0125 mm)
Solid or vented rear rotors
Solid rear rotors are a simpler design than vented ones, with no gap between two faces to move air. They are common on rear axles where braking load is lighter, and they are matched to specific brake hardware. Because fit depends on the rotor type, confirming whether the vehicle has solid or vented rear discs is the first check before ordering.
A solid rotor relies on its own thickness to absorb heat, so the drilled holes and slots on this face help clear gas and debris rather than move heat the way a vented disc does. Rear pads usually wear more slowly than front pads, but rust on the disc face and hub can build up over time, especially where road salt is common.
- Confirm the rotor type before ordering
- Inspect rear pads and rotors together
- Clean rust from the hub face
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR83075XPR |
| Product type | Rear brake rotors, drilled and slotted |
| Disc material | Cast iron |
| Disc design | Solid |
| Position | Rear |
| Number of lugs | 5 |
| Coating | Coated (silver zinc dichromate) |
| Maximum run-out | 0.0032 in (0.08 mm) |
| Maximum DTV tolerance | 0.0005 in (0.0125 mm) |
| Quantity | 2-wheel set |
| Fit | Direct fit |
Vehicle fitment
It fits the 2011–2020 Dodge Durango in Express, SXT, Limited, Citadel, R/T and SRT trims, and the Jeep Grand Cherokee in Laredo, Limited, Overland, Summit and Trailhawk trims, covering the 2011–2017 WK generation and the 2018–2020 Grand Cherokee. One part number covers both vehicles.
It is meant only for vehicles with solid rear rotors; vented rear rotors need a different part. Later Grand Cherokees are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace both rear rotors together and fit new rear pads, so the solid discs and the pad faces wear in together.
What’s included
Two solid rear rotors, one per side.
Not included: Brake pads and mounting hardware.









