Overview
The JBR1126XPR is a front slotted and cross-drilled brake rotor for the 2000–2006 Mitsubishi Montero. Its beveled drill holes and rounded slots help keep temperatures down and the pad surface clean under heavy braking.
It is for owners of the 2000–2006 Mitsubishi Montero who want a front rotor with a slotted and cross-drilled face rather than a plain disc.
Rotors are wear parts: the pad surface thins and can warp or score over time. Replacing them restores a flat, true surface for the pads.
Key features
- Slotted and cross-drilled front rotor
- Direct fit for the listed vehicles
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
- Slots keep a clear contact patch between pad and rotor
- Rotor run-out within 0.0015 and DTV tolerance within 0.005
- Coated rotor
Rotor wear and surface condition
Rotors wear slowly as pads grind against them. Over time the friction surface thins, and it can warp, score or develop a lip at the edge. A worn or uneven surface causes pedal pulsing and reduced pad contact, which is why the rotor is usually replaced along with the pads.
Good surface preparation helps a new rotor last. Clean the hub face and remove any rust before mounting, and check that the rotor seats flat against it. Tighten the fasteners with care, and verify pad clearance before the wheel goes back on. A flat, clean mount keeps the pads working evenly across the face.
- Check the hub for rust before mounting
- Measure rotor thickness against the old part
- Look for blue heat marks after hard braking
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1126XPR |
| UPC | 792088926500 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Front |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 2000–2006 Mitsubishi Montero in Base, Limited and XLS trims.
Use the old rotor’s diameter, thickness, bolt pattern and weight as the reference when ordering.
Only the 2000–2006 Montero applies; other Mitsubishi models, including the Montero Sport, fall outside this part. Confirm your year, model and trim match before you order.
Installation notes
Mount the rotor on a clean hub face, free of rust and debris, so it seats flat.
What’s included
The package is a single front brake rotor.
Not included: Pads, hardware and any brake fluid are separate items and are not part of the rotor listing.









