Overview
The Power Stop AR8656XPR is a rear drilled and slotted brake rotor for the 2003 and 2005 Chevrolet Silverado 1500 HD, the 2003 and 2005 GMC Sierra 1500 HD and the 2003–2005 GMC Yukon XL 2500. The AR8656XPR is made for the rear axle, uses cross-drilled holes together with slots, and arrives coated.
A G3000 grade casting and silver zinc plating give this rotor its rust protection, and the drilled and slotted face looks good behind factory or custom wheels.
For 2003/2005 Silverado and Sierra 1500 HD, Yukon XL 2500, the AR8656XPR replaces the original rear rotor with a drilled and slotted version that Power Stop says keeps a clear contact patch between pad and rotor.
This drilled and slotted rotor suits street use and daytime driving. The holes add cooling and the slots sweep away gas and dust from the pad surface.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Rear brake service tips
Rear brakes do less of the stopping work than the front on most trucks, but they still handle heat and wear, and they are often where the parking brake works. A drilled and slotted rear rotor helps clear gas and dust from the pad, which keeps the contact area steady during regular driving.
Rear rotors are normally replaced in pairs so braking stays balanced from side to side. Check the rear hubs for play and rust, and make sure the caliper bracket bolts are tight. Pads should be fitted with fresh hardware, and the new pads should be bedded in gradually before heavy use.
- Clean the hub mounting face before fitting
- Check the parking brake cable and adjuster
- Replace the rotor when it is below minimum thickness
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8656XPR |
| UPC | 792088923745 |
| Type | Slotted and cross drilled |
| Position | Rear |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits these rear-axle applications: 2003 and 2005 Chevrolet Silverado 1500 HD (Base, LS, LT); 2003 and 2005 GMC Sierra 1500 HD (SLE, SLT); 2003–2005 GMC Yukon XL 2500 (SLE, SLT). Confirm fit for your vehicle’s year, model and trim before ordering.
The AR8656XPR list skips 2004 for the Silverado and Sierra 1500 HD, and it covers the rear axle only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the AR8656XPR to the rear brakes, check that the hub and caliper hardware are in good condition, and bed in the pads after installation.









