Overview
The Power Stop AR8580XPR is a front slotted and cross-drilled brake rotor for the 2000–2005 Ford Excursion and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty. The AR8580XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
Drilled, slotted and zinc plated, this rotor is aimed at drivers who want better heat control and pad contact, with a direct-fit design made for the listed vehicles.
Power Stop’s description of the AR8580XPR stresses two jobs for the surface: drilled holes help carry heat away, and slots keep gas, water and dust from building up between pad and rotor.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Pad and rotor pairing
A rotor and pad set works as one system, so the pad compound should suit a drilled and slotted face. Very hard pads can glaze a rotor, while soft pads can wear quickly against slotted edges. Choose pads rated for the rotor’s intended duty, whether that is light towing or mixed highway and trail use. Bedding the new pads correctly lays an even transfer layer on the rotor face, which helps the brakes respond evenly from the first stop.
The front axle of these trucks carries a large share of braking load, so uneven wear shows up quickly. Check that the caliper slides move freely and that the hub face is clean and flat before mounting the rotor. A rotor seated on rust or debris can run out of true even when it is new.
- Replace pads and rotors together for even wear
- Inspect slot edges for cracks at every pad change
- Torque lug nuts in a star pattern
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8580XPR |
| UPC | 792088553119 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS, XLT); 1999–2004 Ford F-250 Super Duty (King Ranch, Lariat, XL, XLT); and 1999–2004 Ford F-350 Super Duty (King Ranch, Lariat, XL, XLT). Model years run from 1999 to 2005 across 3 vehicle entries.
The AR8580XPR is the front-axle part. Its list ends at 2004 for the F-250 and F-350, so a 2005 Super Duty needs another part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the AR8580XPR to the front brakes, check that the hub and caliper hardware are in good condition, and bed in the pads after installation.









