Overview
The Power Stop Evolution AR82189XPR is a pair of drilled and slotted rear brake rotors for the 2015-2020 Chevrolet Colorado and the 2015-2020 GMC Canyon. The rotors are sold as a pair and cover both rear wheels.
Drilled holes allow maximum rotor cooling and keep brake temperatures down under extreme operating conditions. Rounded slots wipe away gas and debris to leave a clear contact patch.
Power Stop says its Evolution rotors help keep brake temperatures down under extreme operating conditions, which suits a mid-size truck used for towing or trail driving. Sold as a pair, the AR82189XPR gives both rear wheels of a Colorado or Canyon a matching rotor. Power Stop guarantees fit for the vehicle and gives two machining limits, a maximum run-out and a maximum DTV tolerance, so owners can see how closely each rotor is held.
Key features
- Rear position, sold as a pair
- Precision drilled holes for rotor cooling
- Rounded slots clear gas and debris from the contact patch
- Silver zinc dichromate plating on all drilled and slotted rotors except hub assemblies, to prevent rust and corrosion
- Machined and mill balanced
- Maximum rotor run-out 0.0032 in (0.08 mm)
- Maximum DTV tolerance 0.0005 in (0.0125 mm)
Choosing a set
Rear rotors on a mid-size truck carry less load than the fronts, yet they still handle a large share of stopping when the parking brake is applied and when the rear axle takes weight during towing. Because both rear rotors wear at similar rates, a pair is the usual way to restore even braking from side to side. While the wheels are off, inspect the caliper bracket and the pad backing plates as well.
Drilled and slotted faces can wear pads faster than plain rotors, so pick a pad material matched to your use. Hauling loads or working grades calls for a pad that tolerates heat, while mostly highway driving suits a softer compound. Recheck the rotor surface after the first few drives to confirm the wear pattern is even.
- Check the rotor surface for heat cracks or blue discoloration
- Clean the hub face and wheel mating surface before fitting
- Re-check wheel lug torque after the first drive
- Replace rear rotors in pairs for matched braking
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR82189XPR |
| Part type | Evolution drilled and slotted brake rotors |
| Position | Rear |
| Quantity | Pair |
| Plating | Silver zinc dichromate |
| Maximum run-out | 0.0032 in (0.08 mm) |
| Maximum DTV tolerance | 0.0005 in (0.0125 mm) |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2015-2020 Chevrolet Colorado and the 2015-2020 GMC Canyon.
Model years before 2015 are not covered, and the front rotors for these trucks are a different part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Run-out and thickness variation, called DTV, are the machining tolerances Power Stop publishes, so install the rotors on clean hub faces to keep them within those limits.
What’s included
Two rear rotors in a pair.
Not included: Brake pads and hardware are not part of this set.









