Overview
The Power Stop AR8563XPR is a front slotted and cross-drilled brake rotor for the 1997–2000 Ford Expedition, the 1999–2000 Ford F-150 Lightning and the 1998–2000 Lincoln Navigator. The AR8563XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
A G3000 grade casting and silver zinc plating give this rotor its rust protection, and the drilled and slotted face looks good behind factory or custom wheels.
For 1997-2000 Expedition, 1999-2000 F-150 Lightning, Navigator, the AR8563XPR replaces the original front rotor with a drilled and slotted version that Power Stop says keeps a clear contact patch between pad and rotor.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Choosing and checking rotors
Front rotors on a truck or SUV carry most of the braking load, so the condition of the disc and hub matters for every stop. Drilled and slotted rotors add cooling channels and slots that help clear gas and dust from the pad face. These features suit drivers who brake hard or tow, though everyday driving also benefits from a clean, true rotor.
Before installation, remove the old rotor, clean the hub mounting face and check for rust that could stop the rotor from seating flat. Inspect the caliper bracket and slide pins, since a sticking caliper can wear one pad faster and overheat the rotor.
Pads should be bedded in after fitting with a series of moderate stops. Avoid holding the brake pedal at a stop right after a hard run, and let the brakes cool before heavy use. Replace front rotors in pairs and inspect them at every pad change for cracks, grooves and pulsation.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8563XPR |
| UPC | 792088923363 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The drilled holes help keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
The AR8563XPR fits 1997–2000 Ford Expedition (Eddie Bauer, XLT), 1999–2000 Ford F-150 Lightning and 1998–2000 Lincoln Navigator (Base).
The AR8563XPR does not cover 2001 and newer Expeditions or Navigators, and a standard F-150 is not on its list; only the Lightning is. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the AR8563XPR to the front brakes, check that the hub and caliper hardware are in good condition, and bed in the pads after installation.









