Overview
The Power Stop Evolution AR8555XPR is a set of slotted and cross-drilled front brake rotors for the 1997-2000 Ford F-150. The rotors are vented cast iron with five lugs, coated, and sold as a 2 wheel set.
Power Stop says drilled and slotted rotors combine drilled holes for cooling with slots that clear away gas and dust, and that its rotors use G3000 grade castings.
The design is intended to keep an older F-150 stopping consistently under load, using the OE direct fit with no vehicle modifications described.
The rotors are made from G3000 grade castings and carry a silver zinc plating to resist rust. The five-lug pattern matches the front hub of the listed trucks, and the set arrives as a pair so both sides can be done together.
Key features
- Slotted and cross-drilled front rotors
- Vented cast iron, 5 lugs
- 2 wheel set, coated
- G3000 grade castings
- Silver zinc plated except hub rotor assemblies
- Direct OE fit
Keeping an older F-150 stopping well
An F-150 from this period often runs on original-style brakes that have seen many years of service. Front rotors wear with heat cycles and pad contact, so a rotor that has developed a lip, a groove or a blue tint should be measured and replaced. Check the wheel bearings and steering components at the same time, since a loose part can make a good rotor seem to wear unevenly.
When refreshing the front brakes, match the pads to how the truck is used. Daily driving calls for a quieter pad, while frequent towing needs a compound that handles heat. Bed in the new pads gently and check the pedal after the first few stops before returning the truck to regular use.
- Measure rotor thickness before reusing old rotors
- Inspect wheel bearings during the same service
- Clean the hub face and wheel mating surface
- Check pedal feel before the truck is driven
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR8555XPR |
| Part type | Evolution drilled and slotted brake rotors |
| Disc material | Cast iron |
| Style | Vented |
| Position | Front |
| Number of lugs | 5 |
| Quantity | 2 wheel set |
| Coating | Coated |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1997-2000 Ford F-150.
Later F-150 generations, including the 2001 and newer trucks, are not covered, and the AR8555XPR is not for the rear brakes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor set replaces both front rotors on the axle. Use new pads, and check brake pedal feel before the truck leaves the shop.
What’s included
Two front rotors for the 1997-2000 F-150.









