Overview
The Power Stop AR8213XPR is a front slotted and cross-drilled brake rotor for the 1989–1995 Chevrolet S10 pickup, the 1989–1994 S10 Blazer and the matching GMC Sonoma, Jimmy and S15 Jimmy.
Slotted for pad degassing and cross-drilled for cooling, the Evolution rotor is built for owners who want both features on one disc. Power Stop claims cross-drilled holes keep the rotor up to 180°F cooler.
Key features
- Power Stop credits the cross-drilled holes with rotor temperatures up to 180°F lower
- Slots keep a clear contact patch between the pad and the rotor
- Tru-Cast technology with precision machining
- Runout specification of 0.0015 and DTV specification of 0.005
- Balanced by milling, as with all Evolution rotors
- Zinc plated finish in silver for corrosion resistance
- G3000 grade casting
- Aimed at reducing fade
- Visual upgrade behind factory or aftermarket wheels
Slotted, drilled or plain
Slotted, drilled and plain rotors each trade off differently. Plain discs are the simplest and tend to be quiet, while slots help clear debris from the pad face and drilled holes move gas and heat away from the surface. A combination like this one suits drivers who see frequent hard stops on pavement, towing or spirited back-road use. For a light commuter, a plain rotor may be all that is needed.
On older S10 and Sonoma trucks, the rest of the brake system often shows age too. Inspect the caliper slide pins, the flexible hoses and the wheel bearings before fitting new discs, since a worn part can mimic rotor problems. Clean the hub face of rust, and replace pads in matched sets. Check rotor thickness at each pad change and replace the disc once it reaches its minimum mark.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8213XPR |
| UPC | 792088551528 |
| Product line | Power Stop Evolution |
| Position | Front |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | The rotor is designed to help reduce fade. |
| Appearance | It presents a clean look behind custom or factory wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
It is a front rotor fitting the 1989–1995 Chevrolet S10, the 1989–1994 Chevrolet S10 Blazer, the 1992–1994 GMC Jimmy, the 1989–1990 GMC S15 Jimmy and the 1992–1995 GMC Sonoma.
Listed vehicles:
- 1989–1995 Chevrolet S10 (Base, Durango, EL, LS, SS, Sport, Tahoe)
- 1989–1994 Chevrolet S10 Blazer (Base, LT, Sport, Tahoe, Tahoe LT)
- 1992–1994 GMC Jimmy (Base, SLE, SLS, SLT)
- 1989–1990 GMC S15 Jimmy (Base, Gypsy, Sierra Classic, Timberline)
- 1992–1995 GMC Sonoma (Base, GT, SL, SLE, SLS)
S10 and Blazer years after 1995 and 1994 respectively are outside the AR8213XPR listing. Confirm your vehicle’s year, model and trim before ordering.









