Overview
The Power Stop JBR971XPR is a rear slotted and cross-drilled brake rotor for the 2003–2009 Lexus GX470, the 2003–2009 Toyota 4Runner, the 2007–2009 Toyota FJ Cruiser and the 2001–2007 Toyota Sequoia. It is an Evolution series rotor with a direct fit.
Power Stop combines cooling holes and rounded slots on one rotor face, cast in G3000 grade iron and finished with silver zinc plating. Both features target hard braking, where heat, water and dust can reduce pad contact.
Run out is the wobble of the rotor face as it turns, and DTV is disc thickness variation. The rotor is held to run out within 0.0015 and DTV within 0.005. It is a direct fit, so no modification is needed for the vehicles it fits.
The drilled holes and the rounded slots each have a role on this rotor. The holes help keep temperatures down during extreme braking, and the slots keep the contact patch between pad and rotor clear of water, gas and dust. Together they are designed to reduce fade.
Key features
- Rear-position rotor with cross-drilled holes said to run up to 180°F cooler
- Rounded slots that sweep gas, water and dust away from the pad
- Beveled and precision-drilled holes made for extreme braking
- Tru-Cast machining, with run out within 0.0015 and DTV tolerance within 0.005
- Mill balanced, G3000 grade casting
- Silver zinc plated to resist rust in normal use
- Reduces fade
Rear brakes and towing
Rear rotors on body-on-frame SUVs and trucks often carry less load than fronts, but they still matter for stability under braking, especially with a loaded roof rack or trailer. Drilled and slotted faces help manage heat and debris during repeated stops, which is useful on long descents.
Rear parking brakes on some of these models use the rotor hat or a drum-in-hat arrangement, so check the parking brake operation after fitting. Inspect the rotor face for heat cracks, deep grooves and blue discoloration, and check the pads for even wear. Replacing rear pads with the rotors keeps the contact surface consistent.
- Clean the hub face and remove rust before fitting
- Torque wheel fasteners to the vehicle’s specification after the first drive
- Check rear brake lines for leaks after pad bedding
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR971XPR |
| UPC | 792088561107 |
| Product type | Brake rotor, rear |
| Rotor design | Slotted and cross drilled |
| Casting grade | G3000 |
| Coating | Coated (silver zinc plated) |
| Location | Rear |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2003–2009 Lexus GX470, the 2003–2009 Toyota 4Runner, the 2007–2009 Toyota FJ Cruiser and the 2001–2007 Toyota Sequoia at the rear axle.
Only the rear position is covered, and 4Runner years before 2003 are not included. Verify your year, model and trim before ordering.
Installation notes
Replace the rear rotors as a pair and fit new rear pads at the same time. Bed the new pads in gradually so the drilled and slotted faces wear evenly.









