Overview
The Power Stop AR8647XPR is a rear slotted and cross-drilled brake rotor for the 2002–2009 Chevrolet Trailblazer and GMC Envoy, plus related SUVs such as the Buick Rainier, Isuzu Ascender and Saab 9-7x. The AR8647XPR is made for the rear axle, uses cross-drilled holes together with slots, and arrives coated.
The holes are beveled and precision drilled to help hold temperatures down during extreme braking, and the rounded slots keep the pad-to-rotor contact patch clear of water, gas and dust.
Shoppers comparing rear rotors for 2002-2009 Trailblazer, Envoy, Rainier, Ascender, 9-7x will find the AR8647XPR described by Power Stop as precision machined with Tru-Cast technology, with holes and slots that reduce fade.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Rear brakes on SUVs and trucks
Rear rotors on body-on-frame SUVs and trucks carry less braking load than the fronts, but they still see heat on steep descents and when a vehicle is loaded. Rear parking brake hardware and caliper slides also affect how evenly the rotor wears, so inspect them when replacing rotors.
Drilled and slotted rotors shed heat and debris, which can help on long grades, but they also need careful pad selection. After installation, bed in the new pads with a series of moderate stops and avoid holding the brakes on hot rotors. Check the rear rotors at every oil change for scoring or cracking.
- Inspect caliper slide pins for smooth movement
- Check for rust on the hub and rotor mounting surface
- Replace both rear rotors together to keep braking even
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8647XPR |
| UPC | 792088553676 |
| Type | Slotted and cross drilled |
| Position | Rear |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | Drilled holes help rotors stay up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits the rear axle of 2002–2009 Chevrolet Trailblazer and GMC Envoy, plus the 2004–2007 Buick Rainier, 2003–2006 Chevrolet SSR, 2002–2006 GMC Envoy XL, 2004–2005 GMC Envoy XUV, 2003–2008 Isuzu Ascender, 2002–2004 Oldsmobile Bravada and 2005–2009 Saab 9-7x.
It goes on the rear axle only, and Trailblazer and Envoy model years after 2009 are not covered. Make sure your truck’s year, model and trim match before you order.
Installation notes
The AR8647XPR is a direct-fit replacement, so it goes on the rear hubs of the listed vehicles in place of the original rotors; replace both sides of the axle together.









