Overview
The Power Stop JBR743XPR is a rear slotted and cross-drilled brake rotor for the 1995–1997 Toyota Land Cruiser and the 1996–1997 Lexus LX450. The JBR743XPR is made for the rear axle, uses cross-drilled holes together with slots, and arrives coated.
The holes are beveled and precision drilled to help hold temperatures down during extreme braking, and the rounded slots keep the pad-to-rotor contact patch clear of water, gas and dust.
Shoppers comparing rear rotors for 1995-1997 Toyota Land Cruiser, 1996-1997 Lexus LX450 will find the JBR743XPR described by Power Stop as precision machined with Tru-Cast technology, with holes and slots that reduce fade.
This design pairs drilled cooling with slots that clear gas and dust for everyday street driving.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Rear axle checks
Rear rotors on Land Cruisers and LX450s work at a lower load than the fronts, yet they still handle heat from repeated stops and from holding the vehicle on grades. A cross-drilled and slotted face gives those rear brakes a way to shed heat and gas, which helps keep the pedal feel consistent.
Look at the rotor edge for lips or grooves, and at the hub face for rust before installation. Replace pads with the rotor so the surfaces wear together, and make sure caliper hardware moves freely. Rotors with heavy scoring or heat spots should usually be replaced rather than resurfaced.
- Clean the hub face thoroughly
- Check caliper hardware for free movement
- Bed in pads with several moderate stops
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR743XPR |
| UPC | 792088560223 |
| Type | Slotted and cross drilled |
| Position | Rear |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits the 1995–1997 Toyota Land Cruiser (Base) and the 1996–1997 Lexus LX450 (Base). It is a rear rotor for the rear axle only.
The JBR743XPR does not cover Land Cruisers from 1998 on, and it goes on the rear axle only. Both the Land Cruiser and the LX450 entries name only the Base trim, so confirm the exact year. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The JBR743XPR is a direct-fit replacement, so it goes on the rear hubs of the listed vehicles in place of the original rotors; replace both sides of the axle together.









