Overview
The JBR790XPR is a front slotted and cross-drilled brake rotor for the 1995–2004 Toyota Tacoma. It is a direct replacement for the original front disc on that truck.
It is aimed at owners of the 1995–2004 Toyota Tacoma who want a front rotor with a slotted and cross-drilled face rather than a plain disc. Verify your truck’s year, model and trim before ordering.
Rotors and pads wear together, so many owners replace both at the same time rather than mixing new pads with worn rotors.
Key features
- Slotted and cross-drilled front rotor
- Direct fit for the listed vehicles
- Coated rotor
- Rounded slots that sweep water, gas and dust from the pad contact patch
- Silver zinc plated to shield against rust during normal operation
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
Pads and rotors together
Front rotors on a pickup like the Tacoma carry a large share of stopping force, and the pads and rotor surfaces wear against each other. Slots and cross-drilled holes change how the contact surface sheds dust, water and heat, but they do not make a worn rotor safe to keep. A new rotor paired with a glazed or uneven set of pads may chatter or fail to bite evenly, so the two are best treated as one system.
Before fitting, inspect the caliper slide pins, hub surface and rotor mounting face, and clean any rust from the hub so the rotor sits flat. Look for scoring, heat cracks, or a pulsing pedal when you test the brakes at low speed. If the old rotor showed any of these, replace the pads at the same time and bed them in gradually.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR790XPR |
| UPC | 792088560551 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Front |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 1995–2004 Toyota Tacoma in Base trim.
Measure the rotor diameter, thickness, bolt pattern and weight against the rotor you are replacing before installing.
The fit covers only the 1995–2004 Tacoma. Later Tacoma years, the 4Runner and other Toyota trucks are not covered, so do not assume a fit. Verify your year, model and trim before ordering.
Installation notes
Re-check the wheel lug nuts after the first drive following the work.
What’s included
The JBR790XPR is a brake rotor and comes with no additional parts.
Not included: Any pads, hardware or sensors your vehicle needs are separate from the rotor.









