Overview
The Power Stop AR8609XPR is a front slotted and cross-drilled brake rotor for 1988–1999 Chevrolet and GMC K1500 and K2500 trucks, plus the Tahoe, Suburban, Yukon, Blazer and 1999–2000 Escalade. The AR8609XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
The drilled holes keep rotors up to 180°F cooler, and the rounded slots sweep water, gas and dust away so the pad keeps a clear contact patch.
In Power Stop’s own wording, the AR8609XPR belongs to its Evolution line, where every rotor is mill balanced and the drilled and slotted face is meant to look good behind custom or factory wheels.
Key features
- Rounded slots clear water, gas and dust
- Cross-drilled holes for cooling
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Pairs, pads and bedding-in
Front rotors work in pairs, so replacing one side alone can leave the truck pulling under braking. Check the caliper, brake hose and hub bearing at the same time, since a sticking caliper will overheat even a good rotor. Torque the wheel lugs in a star pattern after the first drive, and check them again after a short distance.
Choosing the pad is part of the job. A pad that suits a drilled and slotted rotor will seat evenly and resist glazing. Bedding in new pads usually means a series of moderate stops followed by a cool-down period, which helps transfer an even layer of pad material. Watch for vibration, pulling or a soft pedal over the first stretch of driving.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8609XPR |
| UPC | 792088553362 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | Its cross-drilled face runs cooler in service, with holes that help carry heat away. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 1999–2000 Cadillac Escalade (Base); 1992–1994 Chevrolet Blazer (Base, Cheyenne, Silverado, Silverado Sport); 1988–1999 Chevrolet K1500 (Base, Cheyenne, LS, Scottsdale, Silverado, Sport, WT); 1992–1999 Chevrolet K1500 Suburban (Base, LS, LT, Silverado); 1990–1998 Chevrolet K2500 (Base, Cheyenne, Scottsdale, Silverado, WT); 1996–1999 Chevrolet Tahoe (Base, LS, LT); 1988–1999 GMC K1500 (Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport); 1992–1999 GMC K1500 Suburban (Base, SLE, SLT); 1988–1998 GMC K2500 (Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX); 1992–1994, 1996–1999 GMC Yukon (Base, Denali, GT, SL, SLE, SLT, Sport). Model years run from 1988 to 2000.
K3500 trucks and 2000 and newer Silverado or Sierra models are not on the AR8609XPR list, and it is a front rotor only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace front rotors in left and right pairs, and bed in new pads once the rotors are fitted, following the bedding steps for the pads you choose.









