Overview
The Power Stop AR8729XPR is a front slotted and cross-drilled brake rotor for the 1994–1999 Dodge Ram 1500. The cross drilled holes help keep the rotor up to 180°F cooler, while the rounded slots sweep water, gas and dust away so the pad keeps a clear contact patch.
It suits owners of the 1994–1999 Dodge Ram 1500 who want a front rotor with a slotted and cross drilled face rather than a plain disc. Check your vehicle’s year, model and trim before you order.
A brake rotor is the disc that the brake pads clamp against to slow the wheel. Drilled and slotted versions change the face of that disc to move heat and debris away from the pad.
Key features
- Slotted and cross-drilled front rotor
- Direct fit for the listed vehicles
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
Replacing front rotors
Front brakes do most of the stopping work on a pickup, since weight shifts forward during braking. A slotted and cross drilled rotor sheds heat and debris, but it still wears, so inspect the face for scoring, heat cracks and uneven thickness at each pad change.
Clean the hub mounting face and remove any rust before the rotor goes on, because a dirty hub can cause runout and pulsing. Check the wheel bearing play and the caliper slide pins while the wheel is off, since problems there can wear a new rotor quickly.
After installing front rotors, bed the pads with gradual stops and let the brakes cool between hard runs. Check the brake fluid level and pedal feel before driving the truck on a public road.
- Clean hub face and remove rust
- Inspect wheel bearing play
- Check pedal feel before driving
- Bed pads in with moderate stops
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8729XPR |
| UPC | 792088553966 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Front |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 1994–1999 Dodge Ram 1500 in the Base, LT, Laramie, ST and Sport trims.
Measure the rotor diameter, thickness, bolt pattern and weight, and compare them with the part you are replacing before installing.
The fit covers Ram 1500 model years 1994 to 1999 only; later Ram 1500 generations are outside that range. Verify your vehicle’s year, model and trim before buying.
Installation notes
Fit new pads to the same axle when replacing rotors, then bed them in with gentle stops.
What’s included
The AR8729XPR is a single brake rotor with no additional parts included.
Not included: Brake pads, calipers and mounting hardware are needed separately.









